Samsung CLP-510 Series manual Printer on, Check for leaking toner. Clean the inside of the printer

Problem	Solution
Back of printouts	• The transfer roller may be dirty. See “Cleaning the Inside of
are dirty	the Printer” on page 6.30.
	• Check for leaking toner. Clean the inside of the printer.

Solid Color or	• The imaging unit may not be installed properly. Remove the
Black pages	imaging unit and reinsert.

•The imaging unit may be defective and need replacing. Install a new imaging unit.

•The printer may require repair. Contact a service A representative.

	Loose toner		• Clean the inside of the printer.
			• Check the paper type and quality. See “Paper Specifications”
			on page E.4.
			• Install a new toner cartridge. See “Replacing Toner Cartridges”
			on page 6.8.
			• If the problem persists, the printer may require repair. Contact
			a service representative.
Character Voids			Character voids are white areas within characters that should be
			solid black:
		A	• If you are using transparencies, try another type of
			transparency. Due to the composition of the transparency,
			some character voids may be normal.
			• You may be printing on the wrong surface on the paper.
			Remove the paper and turn it around.
			• The paper may not meet paper specifications. See page E.4.
Horizontal stripes			If horizontally aligned color or black streaks or smears appear:
			• The imaging unit may be installed improperly. Remove the
		AaBbCc	imaging unit and reinsert.
		AaBbCc	• The imaging unit may be defective. Install a new imaging unit.
		AaBbCc	See “Replacing the Imaging Unit” on page 6.14.
			• If the problem persists, the printer may require repair. Contact
		AaBbCc
			a service representative.
		AaBbCc

7

SOLVING PROBLEMS 7.25