Samsung CLP-510 Series 1st byte between 1 and 255, Then press the Enter button, Byte the same way

Item	Explanation
	You can select this item only when you
	set IP Get Method to Static. This item	2
	lets you enter the IP address manually.
IP Address	Press the scroll button to set the value of
	the 1st byte between 1 and 255, and
	then press the Enter button.
	Set the value for the 2nd, 3rd, and 4th
	byte the same way.
	You can set this item only when you set
	IP Get Method to Static. This item lets
	you enter the subnet mask manually.
Subnet Mask	Press the scroll button to set the value of
	the 1st byte between 1 and 255, and
	then press the Enter button.
	Set the value for the 2nd, 3rd, and 4th
	byte the same way.
	You can set this item only when you set
	IP Get Method to Static. This item lets
	you enter the gateway manually. Press
Gateway	the scroll button to set the value of the
	1st byte between 1 and 255, and then
	press the Enter button.
	Set the value for the 2nd, 3rd, and 4th
	byte the same way.
	Values: Yes, No*
	Configure the wireless network
	environments.
	If you select Yes, the following options
	are available: SSID, Operation Mode,
Config 802.11b	Channel, Authentication,
	Encryption, Using Key, Key Type,
	and Key1~Key4.
	See “Configuring the Wireless Network”
	on page C.12
	Note: This menu only appears when an
	optional wireless network interface card
	has been installed.

USING THE CONTROL PANEL 2.13