C.10
7
Press the
Upper Level
button ( ), then use the scroll
button ( ).
8
Press the
Enter
button ( ) when “IP Get Method”
displays.
9
Press the scroll button ( or ) until “DHCP” displays,
and press the
Enter
button ( ).
10
To assign the address from the BOOTP server, press the
Enter
button ( ) when “BOOTP” displays.
11
Press the
On Line/Continue
button ( ) to return to
ready mode.
Configuring IPX Frame Types
On IPX/SPX protocol networks (for example, Novell NetWare),
the format of the network communication frames must be
specified for the printer. In most cases, you can keep the d efault
setting “Auto”. However, you can manually set the frame type
format, if required.
•
Auto
(default): Automatically senses and limits the frame
type to the first one detected.
•
EN_8023
: Limits the frame type to IPX over IEEE 802.3
frames. All others will be discarded.
•
EN_II
: Limits the frame type to IPX over Ethernet Frames.
All others will be discarded.
•
EN_8022
: Limits the frame type to IPX over IEEE 802.2 with
IEEE 802.3 frames. All others will be discarded.
•
EN_SNAP
: Limits the frame type to IPX over SNAP with IEEE
802.3 frames. All others will be discarded.
Note that the IPX/SPX protocol must be enabled in the
Netware
menu before you can configure frame types. See “Setting
Network Protocols” on page C.7.
U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK