Samsung CLP-510 Series manual Press the On Line/Continue

Message	Status	Do this...
Jam	A paper jam has occurred	Open the right cover and remove the
Inside Printer	inside the printer.	jammed paper from the printer,
		referring to page 7.9.
Lever Unlocking	After installing a transfer	Push the lock levers on each side
Error	belt, the lock levers has	away from you, referring to
	not been locked.	page 6.27.
Press	The printer is waiting for	Load a sheet of print material and
Continue Button	the user’s action before	press the On Line/Continue
	printing from the manual	button. You need to press the button
	feeder.	for each page to be printed.
Load	The paper size specified in	Load the correct paper in the tray
[Size] In Tray1	the printer properties
Load	does not match the paper
	you are loading.
[Size] In Tray2
Load
[Size] In MP
Main Motor	A problem has occurred in	Unplug the power cord and plug it in
Error	the main motor of the	again. If the problem persists, call for
	printer.	service.
Memory Overflow	The printer does not have	The job automatically clears and the
	enough memory to print	printer returns to Standby Mode.
	the current job.	• Expand the memory in your printer.
	An error has occurred in	See “Installing Additional Printer
		Memory” on page D.2.
	the firmware program of
	the printer.
Paper Empty	The paper tray has run	Load paper in the paper tray. See
[Size] In Tray1	out of paper.	page 3.4.
Paper Empty
[Size] In Tray2
Paper Empty
[Size] In Mp
Paper Empty
[Size] In Manual
Page Too Complex	Too much complicated	Simplify the page layout and remove
	data was sent to the	unnecessary graphics from your
	printer.	document.
		To expand the memory in your
		printer, see “Installing Additional
		Printer Memory” on page D.2.
Ready	The corresponding toner	Redistribute the toner in the
[Color]Low Toner	cartridge in your printer is	corresponding toner cartridge,
	low on toner.	referring to page 6.5.

7.28 SOLVING PROBLEMS