Samsung CLP-510 Series manual Installing Printer Software in Windows, 64 MB, 128 MB

Installing Printer Software in Windows

Verify the following before you install the printer software:

Item		Requirements
Operating system	Windows 95/98/Me/NT 4.0/2000/XP/
	2003
	95/98/Me		32 MB
RAM	NT 4.0/2000		64 MB
	XP		128 MB
	2003		256 MB
Free disk space	95/98/Me/NT 4.0/		300 MB
	2000/XP/2003
Internet Explorer	5.0 or higher

NOTES:

•For Windows NT 4.0/2000/XP/2003, the system administrator should install the software.

•Windows 95 and Windows NT 4.0 are only supported on the CLP-510N.

CAUTION: For the CLP-510N, to print a document in Windows 95 or Windows NT 4.0, you must install SyncThru and then add a network printer port. For details about installing SyncThru and adding a port, please refer to Network Management Software Quick Guide and SyncThru User’s Guide.

All applications should be closed on your PC before beginning installation.

1Place the CD-ROM in the CD-ROM drive. Installation will start automatically.

If the CD-ROM drive does not automatically run:

Select Run from the Start menu, and type x:\setup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK.

NOTE: If the New Hardware Found window appears during the

installation procedure, click in the upper right corner of the box to close the window, or click Cancel.

22SETUP GUIDE