Samsung CLP-510 Series manual An IP address consists of 4 bytes, Dynamic Addressing BOOTP/DHCP

An IP address consists of 4 bytes.

Enter a number between 0 and 255 for each byte.

12Press the scroll button ( or ) to enter a number between 0 and 255 and press the Enter button ( ).

13Repeat step 12 to complete the address from the 1st byte to the 4th byte.

14To select other parameters, such as the Subnet Mask or Gateway, press the scroll button ( or ). Press the Enter button ( ).

15Repeat steps 12 through 13 to configure the other TCP/IP parameters.

16Press the On Line/Continue button ( ) to return to ready mode.

Dynamic Addressing (BOOTP/DHCP)

To assign the TCP/IP address automatically by the server, take the following steps:

1In ready mode, press the Menu button ( ) until you see “Network” on the bottom line of the display. Press the Enter button ( ) to access the menu.

2Press the Enter button ( ) when “Config Network”

displays on the bottom line.			C
3 Press the scroll button (	or	) until “Yes” displays, and
press the Enter button (	).

4Press the Upper Level button ( ), then use the scroll button ( ).

5Press the Enter button ( ) when “Config TCP” displays.

6Press the scroll button ( or ) until “Yes” displays, and press the Enter button ( ).

USING YOUR PRINTER ON A NETWORK C.9