3Com RMON-EMP-3 Modem Cable Pinouts, Sample Out-of-Band Connections

Modem Cable Pinouts

You can connect a modem to the RMON MultiProbe Module to allow a remote client to have out-of-band access to the module if the main network link fails. For example, you can access the RMON MultiProbe Module using Serial Line Internet Protocol (SLIP).

From a management workstation (such as one using the 3Com ONdemand LANsentryä software), you can physically connect the RMON MultiProbe Module to any of the following devices:

❑Modem

❑Data switch

❑Serial line

Sample Out-of-Band Connections

Figure A-2 provides two examples of out-of-band connections to the RMON MultiProbe Module in an ONline System Concentrator with the following connections:

❑Modem

❑Direct SLIP

The modem that you connect to the RMON MultiProbe Module must be Hayes-compatible.

Specifications A - 7