2

Before You Begin

This manual provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist:

You have performed the steps in "Turning Off Your Computer" on page 11 and "Safety Instructions" on page 12.

You have read the safety information that ships with your computer.

A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse order.

Technical Specifications

For information on technical specifications of your computer, see the Setup Guide that shipped with your computer or see the Dell Support website at support.dell.com/manuals.

Recommended Tools

The procedures in this document may require the following tools:

Small Phillips screwdriver

Small flat-blade screwdriver

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.

1Shut down the operating system.

Before You Begin

11

Page 11
Image 11
Dell 2010 service manual Before You Begin, Technical Specifications Recommended Tools, Turning Off Your Computer