Dell 2010 - page 65

Power Supply 65
3 Connect the DC power cables to the system board and drives.
4 Secure all the cables to the securing clip on the side of the power supply.
NOTE: Double-check all cable connections to make sure they are secure.
5 Replace the computer cover (see "Replacing the Computer Cover" on
page 16).
6 Check the voltage selector switch (if applicable) to ensure that the correct
voltage is selected.
7 Connect your computer and devices to an electrical outlet, and turn them
on.
book.book Page 65 Monday, November 19, 2012 11:42 AM