Boot Device Configuration
Boot Setting Config • Numlock
| • Halt |
| by default) |
Removable Device | Press Enter for details. This is a dynamic list and is |
Priority | updated based on the removable devices connected to |
| your computer. |
Hard Disk Boot | Set the hard drive boot priority, if multiple hard drives |
Priority | are installed. |
Set the optical drive boot priority, if multiple optical | |
Priority | drives are installed. |
1st Boot Device | Removable; Hard Disk; CDROM; Network; Disabled |
| (Hard Disk by default) |
2nd Boot Device | Removable; Hard Disk; CDROM; Network; Disabled |
| (CDROM by default) |
3rd Boot Device | Removable; Hard Disk; CDROM; Network; Disabled |
| (Removable by default) |
Power Management Features
ACPI Suspend Type | S1(POS); S3(STR) (S3(STR) by default) |
Remote Wake Up | Disabled; Enabled (Enabled by default) |
Auto Power On | Disabled; Enabled (Disabled by default) |
Auto Power On Date | 0 |
Auto Power On Time | 0:00:00 |
AC Recovery | Last Power State; Power On; Power Off (Power Off by |
| default) |
Load Defaults
Loads the factory default system setup settings.
Set Supervisor Password
Allows you to set a supervisor password of up to eight characters. The supervisor password allows you to access your computer and to modify the system setup settings.
To disable the supervisor password, leave the Enter Password field blank and press <Enter>.
System Setup
73
