3Com RMON-EMP-3 installation and operation guide Configuring the Module 3

This configuration sets up one interface for each bridged segment.

To assign an IP address or subnet mask for an interface:

1.From the Main menu, select option 1, Modify/View Configuration Values, and press Return. The Modify/View Configuration Values menu is displayed (see Figure 3-4).

2.From the Modify/View Configuration Values menu, select option 1, Modify/View Network Settings, and press Return. The Modify/View Network Settings menu is displayed (see Figure 3-6).

3.From the Modify/View Network Settings menu, select option 1, 2, or 3 (depending on which interface you want to modify) and press Return. The Modify/View Network Interface 1 Settings menu is displayed (Figure 3-7).

4.To assign:

a.An IP address, select option 1. The module displays the current value and prompts you to enter a new value.

b.A subnet mask, select option 2. The module displays the current value and prompts you to enter a new value.

5.To modify an IP address or subnet mask, delete one character at a time using the Backspace key. To delete the entire value, press Ctrl-U.

6.Enter the new value and press Return.

7.Select S to save the changes and return to the previous menu.

8.Repeat steps 3 through 7 to assign an IP address and subnet mask for each interface.

Configuring the Module 3 - 27