Figure 2-1 shows the RMON MultiProbe Module installed in an ONline System Concentrator. You can also install the RMON MultiProbe Module in the ONcore MultiProtocol Switching Hub using an ONline Module Adapter Kit.

RMON MultiProbe Module

Figure 2-1. RMON MultiProbe Module in the

ONline System Concentrator

4.Using your fingers, tighten the spring-loaded screws on the front of the module faceplate (do not overtighten). Once you install the RMON MultiProbe Module, it begins diagnostic testing automatically.

5.Connect one end of an RS-232 cable to the RS-232 port on the front of the module.

6.Connect the other end of the cable to a terminal (as described in the next section).

2 - 6 Ethernet RMON MultiProbe Module Installation and Operation Guide

Page 34
Image 34
3Com RMON-EMP-3 installation and operation guide Rmon MultiProbe Module ONline System Concentrator