Preparation
Preparation (Continued)
Assembling the Grass Bag
Note: On some models, the side mounted discharge deflector is temporarily attached (for shipping purposes) to the rear of the mower. Before assembly of the grass bag, remove the side mounted discharge deflector.
1.Slide the frame assembly (A, Figure 5) into the grass bag (B).
2.Make sure the handle (A, Figure 6) is on the outside of the grass bag.
3.First, attach the clips (B, Figure 6) to the side of the frame assembly (C). Next, attach the clips to the top and bottom of the frame assembly.
B |
A |
Figure 5: Installing the frame assembly
A | C |
| B |
Figure 6: Installing the bag clips
6 | www.snapper.com |
