Setting the Date and Time (Date Settings)

You can shoot still images with the time or date stamped onto the picture.

The date/time setting on the setup menu is explained here.

1Display the setup menu.

For the operating procedure, see P.154.

2Press the ADJ./OK button " to select [Date Settings] and press the button $.

3Press the button !"#$ to set the year, month, date and time.

You can press and hold the button !" to quickly raise or lower the setting.

Press the button #$ to move to the next item.

4In [Format], choose the date and time format.

5Check the information on the screen and then press the ADJ./OK button.

Once you have set the date and time, the display returns to the setup menu.

2008 01 01

0000 Y/M/D hh:mm

2008/01/01 00:00

2008 09 01

0012 Y/M/D hh:mm

2008/09/01 00:12

5

Changing Camera Settings

6Press the MENU button or the ADJ./OK button.

Note ----------------------------------------------------------------------------------------------

If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.

To retain the date and time settings, load a battery with adequate remaining power for more than two hours.

181

Page 183
Image 183
Ricoh R10 manual Setting the Date and Time Date Settings, 181