Furuno 1833C Remote Controller Setting, 3-18, Contents of DATA 4 PORT menu, GENERAL SETUP menu

Contents of DATA 4 PORT menu

Item	Description	Settings	Default Setting
NMEA Output	Selects NMEA output format.	NMEA Ver. 1.5, NMEA	NMEA Ver. 2.0
Format		Ver. 2.0
Baud Rate	Sets baud rate.	4800, 9600, 19200 (bps)	4800(bps)
Bit Length	Sets character length.	8 bit, 7 bit	8 bit
Stop Bit	Sets number of stop bits.	1 bit, 2 bit	1 bit
Parity	Sets parity bit.	Even, Odd, None	Even
SELECT	Chooses data sentences to output. For further details see the illustration “NMEA
SNTNC
	data sentences” on page 3-17.
(soft key)

3.7Remote Controller Setting

A remote controller can be set exclusively for use with a specific display unit, in the case of multiple NavNet display units. Set the remote controller ID mode desired on the menu and attach appropriate label (supplied with accessories) to the remote controller and display unit.

1.Press the [MENU] key followed by the SYSTEM CONFIGURATION and GENERAL SETUP soft key to show the GENERAL SETUP menu.

▲	ON
KEY BEEP
LANGUAGE	ENGLISH
RANGE UNIT	nm, kt
TEMPERATURE UNIT	°C
DEPTH UNIT	ft
TEMPERATURE SOURCE	ETR
DEPTH SOURCE	ETR
RESET TRIP LOG	NO

GENERAL SETUP 1

EDIT

NEXT

PAGE

RETURN

Page 1

▲LAT/LON DISPLAY	DD° MM.MMM'
EDIT	LORAN C
TD DISPLAY
SPEED	SOG
POSITION DISPLAY	LAT/LON
TIME DISPLAY	24 HOURS
INFRARED REMOTE MODE	A
RANGE & BEARING MODE	RHUMB LINE
BEARING READOUT	MAGNETIC
MAGNETIC VARIATION	AUTO 7.0° W

GENERAL SETUP 2

EDIT

PREV.

PAGE

Page 2

GENERAL SETUP menu

3-18