Furuno 1943C, 1933C, 1833C, 1823C, GD-1900C, 1953C manual Replacement of the fuse, Power terminal board

Note: The power for the power supply unit and display unit must be drawn from the same power switch on the power terminal board.

Other Equipment (ex. GPS, E/S etc.)

Display unit Power supply unit

Other Equipment

(ex. GPS, E/S etc.)

Other Equipment

(ex. GPS, E/S etc.)

Other Equipment

(ex. GPS, E/S etc.)

Other Equipment

(ex. GPS, E/S etc.)

Power terminal board

CAUTION

The display unit and antenna should be powered from the same power source. This should be done so the antenna will rotate only when the display unit is turned on.

Replacement of the fuse

The power supply unit is shipped with 15 A fuse. Replace fuse with 7 A (supplied) when the ship’s battery is 24 VDC. Note that replace fuse of the display unit with 7 A when the ship’s battery is 24 VDC.

2-7