Furuno 1943C, 1933C, 1833C, 1823C, 1953C Fixing screw, side view, Flush mounting of display unit

Flush mounting

Note: Use supplied six pan head screws when the thickness of the bulkhead is from 11 to 14 mm. For bulkhead which exceeds 14 mm in thickness the length of the pan head screws should be bulkhead thickness (A) plus 7.8±2 mm. Also the length of B should be max. 8 mm.

B A

A: thickness of bulkhead

Fixing screw, side view

1.Prepare a cutout in the mounting location by using the template sheet supplied as the installation material.

2.Fix the display unit by six washer head screws M4x20. Refer to the outline drawing at back of this manual.

6-R2.25			342+0.5
217+0.5	140+0.5	4.5	209+1

335+1

Flush mounting of display unit

Note: When installing the display unit in a panel, attach the vinyl tube (Ф6, local supplied) to the drain hole to allow moisture to escape. Then fasten the tube to the drain hole with a cable tie.

1-3