Toshiba manual STUDIO182/212/242 Specifications, Opc

8 SPECIFICATIONS AND OPTIONS

e-STUDIO182/212/242 Specifications

Model name		DP-1830/2120/2420
Type		Desktop type
Original glass		Fixed
Printing (copying) system		Indirect electrophotographic method
Developing system		2-component magnetic brush developing
Fusing method		2 halogen lamps
Photosensor type		OPC
Original scanning system		Flat surface scanning system
		(When the Reversing Automatic Document Feeder / Automatic
		Document Feeder is installed: Fixed scanning system by feeding
		the original)
Original scanning sensor		Linear CIS sensor
Scanning light source		LED
Resolution	Scanning	600 dpi x 600 dpi
	Writing	2400 dpi x 600 dpi (Smoothing process)
Acceptable originals		Sheets, books and 3-dimensional objects
Acceptable original size		Max. LD
Acceptable copy	Drawer	LD, LG, LT, LT-R, COMP, 13"LG, A3, A4, A4-R, B4, B5, B5-R,
paper size		FOLIO
	Bypass	LD, LG, LT, LT-R, ST-R, COMP, 13"LG, A3, A4, A4-R, A5-R, B4, B5,
		B5-R, FOLIO
Acceptable copy	Drawer	17 - 20 lb. Bond
paper weight
	Bypass	17 - 20 lb. Bond (for continuous feed)
		13 lb. Bond - 90 lb. Index (for single feed)
		17 - 20 lb. Bond (When the Automatic Duplexing Unit is used.)
Warm-up time		Approx. 25 seconds
First copy time (LT portrait)		Approx. 7.7 seconds (e-STUDIO182/212), Approx. 7.5 seconds
		(e-STUDIO242)
Continuous copy speed		See	P.213 “Continuous copying speed”
Multiple copying		Up to 999 copies (digital key entry)
Excluded image	Copy	Leading edge: 0.12"±0.08", Trailing edge: 0.08"±0.08",
width		Both edges: 0.08"±0.08"
	Printer	Leading edge: 0.20"±0.08", Trailing edge: 0.20"±0.08",
		Both edges: 0.20"±0.08"
Reproduction ratio	Actual size	100±0.5%
	Zoom	25 - 200% (in 1% increments)
Storage capacity		Max. 250 sheets or until the memory is full (TOSHIBA’s own chart)
Paper supply	Drawer	250 sheets (20 lb. Bond)
	Bypass	100 sheets (20 lb. Bond)
Loading capacity for the receiving		Approx. 250 sheets (17 lb. Bond)
tray
Toner density adjustment		Magnetic auto-toner system
Exposure control		Automatic plus manual selection from 7 exposure steps
Memory		Page memory: 112 MB
USB interface		USB2.0 (Hi-Speed)
Environment (for normal use)		Temperature: 10 º - 30 ºC (50 º - 86 ºF), Humidity: 20 - 85% (No
		condensation)
Power requirements		115 V±10%, 12 A (50/60 Hz)
Dimensions (equipment only)		23.62" (W) x 25.93" (D) x 18.21" (H)
Power consumption		1.5 kW or less (including options), Performance value: Approx. 1.2
		kW
Weight (equipment including drum)		Approx. 70.5 lb.
Space occupied (equipment only)		37.32" (W) x 25.93" (D)

yThese specifications vary depending on the copying conditions and the environment.

ySpecifications and appearance are subject to change without notice in the interest of product improvement.

212 e-STUDIO182/212/242 Specifications