Toshiba 212, 242, 182 manual Manual paper selection, Place paper in the drawer Place the original

3 COPYING FUNCTIONS

3 Press the APS/AMS selecting button and select APS. (The APS lamp is lit.)

yThe default setting at the installation is APS.

yIf the direction of paper in the drawer differs from that of originals, the image of the original can be copied being rotated by 90 degrees, as long as their sizes are the same (LT only).

4 Select the other copy modes as required, and then press the [START] button.

Manual paper selection

Select the paper size with this method when you use the following originals whose sizes may not be detected correctly with automatic paper selection:

yHighly transparent ones (e.g. overhead transparencies, tracing paper)

yWholly dark ones or ones with dark borders

yNon-standard size (e.g. newspapers, magazines)

In this method, if the desired size of copy paper is not placed in the drawer, replace the paper already placed in the drawer with the desired one, or place the desired size of paper on the bypass tray.

P.39 “Placing paper in drawers”

P.61 “Using Bypass Tray”

1

2

Place paper in the drawer.

Place the original.

68 Paper Selection