Toshiba 212, 242 Alarm lamp, Data lamp, Cancel button, Enter button, Original mode button/lamps

1PREPARATION

16.Alarm lamp

This lamp blinks when an error such as paper jams or running out of toner has occurred. P.178 “When This Message Appears”

17.[DATA] lamp

This lamp blinks while print data or Fax are being received.

18.[CANCEL] button

Use this to cancel the current setting and return to the previous menu.

19.[ENTER] button

Use this to determine items or operation selected in each menu.

20./// (UP/DOWN/LEFT/RIGHT) buttons

Use them to select items you want to set in each menu. The selected item is highlighted.

21.Original mode button/lamps

Use this button to set the image quality of copy according to that of an original. For the details of image quality, see the following page:

P.76 “Selecting Image Mode”

22.Density adjustment buttons/lamps

Use this button to adjust the density of copy image. The [AUTO] lamp below the (automatic copy density mode) button is lit when the density is being automatically adjusted. For the details of density adjustment, see the following page:

P.77 “Adjusting Density Level”

23.[DRAWER] button/lamps

Use this button to select a drawer or the bypass tray to be used as a paper source. The lamp of the paper source currently selected is lit. The lamp blinks when the selected drawer or tray is running out of paper.

When paper in the drawer or on the bypass tray has run out, see the following page to add paper:

P.37 “Preparation 2 - Placing Copy Paper”

24.[COPY] button/lamps

Use this button to select the size of paper to be used. The lamp of the paper size currently selected blinks when this size of paper is not placed in the drawer or on the bypass tray. See the following page for details:

P.68 “Manual paper selection”

25.[ORIGINAL] button/lamps

Use this button to specify the size of an original.

P.74 “Specifying both the sizes of the original and the copy paper”

32 Description of Each Component