Toshiba 182 Specifying reproduction ratio manually, Place paper in the drawer Place the original

e.g.) Selecting LT for copy paper

y You can select the desired paper size with the [DRAWER] button in the same proce- dure.

y When standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this size as “OTHER” size in advance.

P.48 “Registering other standard sizes”

7 Select the other copy modes as required, and then press the [START] button.

Zooming In/Out Copy Image 75

The reproduction ratio is set.

Press the [ENTER] button.

5

6 Press the [COPY] button several times until the lamp of the desired paper size is lit.

4 Press the selecting button B (–) or C (+) to set the desired reproduc- tion ratio.

One press of each button increases or decreases the reproduction ratio by 1%. When you keep pressing either of them, the reproduction ratio also keeps changing. The reproduction ratio can be set from 25% to 200%.

Press the selecting button A to return it to 100%.

Specifying reproduction ratio manually

1 Place paper in the drawer.

2 Place the original.

3 Press the selecting button A. The LCD screen shows as follows:

ZOOM

100%

25% ---- 200%

100%

-

+