Toshiba 182, 242, 212 instruction

2 HOW TO MAKE COPIES

3 Lower the Platen Cover (optional) or the Reversing Automatic Doc- ument Feeder (optional) / Automatic Document Feeder (optional) carefully.

Placing booklet-type originals such as books or catalogs

Place a book-type original on the original glass.

Do not place heavy objects (9 lb. or more) and do not press on it with force.

Breaking the glass could injure you.

1 Raise the Platen Cover (optional) or the Reversing Automatic Docu-

ment Feeder (optional) / Automatic Document Feeder (optional).

2 Open the desired page of the original and place it face down. Align it against the left rear corner of the glass.

3 Lower the Platen Cover (optional) or the Reversing Automatic Doc- ument Feeder (optional) / Automatic Document Feeder (optional) carefully.

yDo not try to lower the Platen Cover (optional) or the Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional) forcibly when the original is very thick. There will be no problem in copying even if they are not fully lowered.

yDo not look fully at the original glass since intensive light may leak out during copy- ing.

54 Placing Originals

Image 56

Toshiba 182, 242, 212 manual Placing booklet-type originals such as books or catalogs

Contents

Operators Manual for Copying Functions Page Preface Preface FCC Notice Before Reading This Manual Lineup of our manualsBasic functions Facsimile functions Scanning functions How to read this manual Symbols in this manual Description of original/paper direction Screens Trademarks Contents Bypass copying 101103 Copying Both Sides of Card into 1 Page ID Card 106 Changing EQUIPMENT’S Settings 157 When This Message Appears 178 Paper Jams 180 STUDIO182/212/242 SpecificationsSpecifications of Options 214 Daily Inspection 206 223 Packing List 216 Copying Function Combination Matrix 217List Print Format 219 Contents Toshiba Quality Is Second to None Co-packed toner cartridge Recommended toner cartridges Cartridge detecting functionToner remaining check function Image quality optimization function General Supplies / PartsToner General Precautions When installing or moving Other points 93.9 31.5 Safety stoppers When using the equipment Position of Certification label, etc During maintenance or inspection When handling supplies First-aid measures Disclaimer Notice Poration Energy saving features Low power modeSleep mode / Super sleep mode Environmental Information Preparation 2 Placing Copy Paper Preparation 1 Turning Power onDescription of Each Component Description of Each Component Front / Right sidePlaten Cover optional, KA-1650PC Bypass tray Left side / Inner side Paper Feed Pedestal optional, KD-1022Paper Feed Unit optional, MY-1027 Drawer Power switch Original glassControl panel External Keyboard optional, GJ-1160 Configuration of options Other options Control panel Edit ReadyZoom Alarm lamp Cancel buttonOriginal mode button/lamps Density adjustment buttons/lamps Copy mode main screen Custom mode settingMessage area Copy quantity Reproduction ratio Selecting button display Preparation 1 Turning Power on Turning power onPress the power switch to on side Department code function. Key in the department code Turning power OFF Saving energy when not in use Energy saving modeTypes of energy saving mode To turn the equipment into the energy saving mode manually Super sleep mode Canceling conditions for energy saving modeSleep mode Feeder Media type Paper size Maximum sheet Capacity *1 Preparation 2 Placing Copy PaperAcceptable media types Recommended paper Paper types not acceptableStoring paper Media type Product name Placing paper in drawers Press down the paper plate Place paper in the drawer Adjust the side guides to the desired paper size Do not let your fingers be caught when closing the drawer Register the paper size into the equipment Placing paper in the drawers of Paper Feed Pedestal optional Adjust the side guides with both hands Adjust the side guides Push the drawer straight until it comes to a stop Preparation 3 Registering Size of Paper Placed Registering standard size LD, LT, LT-R, LG, ST-R Registering other standard sizes Press the Enter button 100% NonsortPage Making Copies Using Bypass TrayPlacing Originals Setting position Type of origi Placing OriginalsAcceptable originals Maximum number of originals scanned in one go Placing originals on the original glass Placing booklet-type originals such as books or catalogs When black streaks appear on the copied image Media types Maximum size Maximum number Paper weight When placing a large amount of originals with a long width Making Copies Check if paper is placed in the drawerPlace the original Select the copy modes as required When Next original? appears When the number of sheets exiting has exceededWhen the paper has run out YES Stopping/Resuming copying Press the CLEAR/STOP button during scanning or copying Interrupting copying and making another copy Interrupt copy Press the Interrupt button Using Bypass Tray Media type Paper size Maximum sheet Capacity *1 Bypass copying Check the menu NonsizeSet the paper size Set the paper type When bypass copying has finished Selecting Image Mode Adjusting Density Level Before Making CopiesPaper Selection Zooming In/Out Copy Image Default settings Contents Default setting at installationBefore Making Copies Confirming set functions Paper Selection Automatic paper selection APS Manual paper selection Place paper in the drawer Place the original Selecting the drawer of the equipment Copying Different Sizes in One Go MIXED-SIZE Copying When Change direction ORG appears Zooming In/Out Copy Image Automatic magnification selection AMS When Change direction ORG appears Specifying both the sizes of the original and the copy paper Specifying reproduction ratio manually Selecting Image Mode Adjusting Density Level To adjust the density to the desired levelTo return it to the automatic copy density mode DarkPage 111 101109 Copy Menu Operating in copy menuSelecting buttons A, B and C Zoom Copy function list Function Description Copying in Same Page Order as Originals Sort Copying Select SORT, and then press the Enter buttonFinishing Sort Sorting Alternately One Set by One Alternation ButtonSelect ALTERNATION, and then press the Enter button Finishing Sort Nonsort Magazine Sort Sorting in Magazine Type Arrangement Magazine SortFinishing Nonsort Alternation Magazine Sort Shifting Paper to Make Margin Image Shift Enter buttonImage Shift Left Margin Right Margin Right Margin Edge Erase OFF Erasing Shadow on Edge Edge EraseSelect ON, and then press the Enter button or button Edge Erase Copying on Both Sides Duplex Simplex P.91 Split P.91 Duplex P.92 Book 2 P.94 Copying on one sideSplit Duplex When all the originals have been scannedCopying on both sides Duplex Simplex Book TypeTablet Type Tablet Type Open to top Copying booklet on both sides Press the Drawer button to select the paper source to useSelectton. Book 2, and then press the Enter button or but Duplex Split Book Margin Right Right Right LeftLeft Left When copying the last Yessingle Copying Right and Left Pages Separately Dual Place paper in the drawer Place an original When all the pages are scanned Dual OFFSelect the other copy modes as required, and then press Start button Printing Page Number, Date and Time Annotation Printing Page Number, Date and Time Annotation Annotation Number Changing Copy Setting on Each Job JOB Build JOB Build OFF Ready JOB BuildAMS JOB Build 4IN1 Duplex a Side 1, b Side Copying 2 or 4 Pages into 1 Page 2IN1/4IN12IN1 4IN1 2IN1 Duplex a Side 1, b Side Simplex Duplex Duplex Book Type Tablet Type Copying Both Sides of Card into 1 Page ID Card CardSelect ON, and then press the Enter button ID Card OFF Turn over the card and place it on the original glass again Place a card original on the original glass100% Sort Zoom Finishing Copying Both Sides of Card into 1 Page ID Card XY Zoom Press the Cancel buttonTion ratio Changing Sizes in Horizontal and Vertical Directions XY Zoom Registering Functions Frequently Used JOB Memory Registering combination of functionsSet all functions you want to register Select JOB Memory in the copy menu, and then press Recalling combination of functions MEMORY4Select RECALL, and then press the Enter button or button Recall Recall MEMORY2 MEMORY3 Page Before Changing the Settings 117 Date and Time 119139 Department Code 141 APS / AMS 157 Before Changing the Settings Displaying the user functions mode main screenDefault Settings Lists 03.INITIAL Setup Button Operating buttons for changing the settingsReturning to the copy mode main screen Clock setting Select Initial Setup withDate and Time Press the User Functions button Key in the time Key in the dateMON Date and time display Time display formatDate format Month format Display Language Setting Initial Setup Date & TimeSelect Language with Language Drawer Size Paper Size SettingGeneral Setting Drawer Size Drawer 1 02.DRAWER Drawer Walkup Screen Setting General Setting Drawer SizeTimers Walkup Screen FAX Scan Walkup ScreenCopy Timer Setting Time of automatic function clear Time of automatic low power mode TimersSelect Auto Clear with Auto Clear Auto Sleep Timers Auto ClearAuto Power Save Save 1MIN Time of automatic sleep mode / super sleep modeTimers Auto Power Auto Sleep Timers Auto Clear 2.AUTO Power SaveTimers AUTO240MIN Energy Saving Mode Energy Saving Mode SettingGeneral Setting Department Code FAX Drawer Setting Sleep Mode Energy Saving ModeSuper Sleep Mode Weekly Timer Setting Sunday Weekly TimerSelect on with and buttons, and then press the Enter button Press the User Functions button or copy mode button Speaker Volume Volume AdjustmentGeneral Setting Timers 04.WEEKLY Timer Speaker Volume Alarm VolumeKEY Touch Volume 3.RINGER Volume Alarm Volume Touch Key Tone Setting Touch KEY Tone Touch KEY Tone OFF Setting department codes Department Code General Setting Weekly Timer 05.SPEAKER Volume Department Code Recover OLD DataDepartment Code NEW Enter the master code name, and then press the Enter button Master Code Code Number Enter Master Code NAMEMAX20Key in the master code, and then press the Enter button Master Code Master Code Number Enter Master Code Enter the department name, and then press the Enter button Department Code Number Enter Department NAMEMAX20Key in the department code, and then press the Enter button Department Code Department Number Changing department names or codes Department Code Enter Department NUMBER1-99 Department Code NumberDepartment Code Delete Modify Enter a new department name, and then press the Enter button Deleting department codes Delete Modify Retain Clearing counter values Department Code Modify Retain Count Clear Printing out counter values Select Lists withLists Function Supply Notice Canceling department management Select no with and buttons, and then press the Enter button Department Code YES Select Copy Setup with Copy SetupMenu Customize Menu Customize Menu Customize Image Shift 5.DUAL ID Card 02.APS/AMS Copy Setup Menu CustomizeImage Mode APS/AMS APS Image Mode Select Default Settings withSelect Copy Setup with Buttons, and then press Enter button Select Image Mode with Buttons, and then press Enter button Text Select the image mode withImage Mode TEXT/PHOTO Photo Density Adjustment Select LIGHT/DARK with Buttons, and then press Enter button LIGHT/DARK AutoManual LIGHT3 Finishing Mode Select Finishing with Buttons, and then press Enter button Finishing NON Sort Pop-Up Display Setting Default Settings 02.LISTSInitial Setup Date & Time 02.LANGUAGE Drawer SET POP-UP Did you change paper size? Various List Printing Department Code Menu List Menu List PrintingSelect Menu List with Machine Revisions Menu List 05.TEST ModeROM Version Display Mail Settings Service NotificationService Notification Mail Settings Sending an EmailSend NOW Mail Address Setting Email addresses Mail Settings Send NOWMail Address Enter the Email address and then press the Enter button Customer Name Setting the customer informationCustomer Information Customer Name Enter NAMEMAX50 UserPage 199 When This Message Appears 178 Paper Jams 180192 When This Message Appears Message Meaning Countermeasure Press Start KEY Message Position of Paper Jam Paper JamsChecking position of paper jams When paper jams occur frequently When releasing jammed paperDo not tear jammed paper Do not touch the photoconductive drum Paper Jams Paper Jams Paper Jams Paper Jams Pull out the paper jammed on the bypass tray Paper jams on bypass trayPaper jams within Automatic Duplexing Unit optional Paper jam behind transfer unit Paper jams within fuser unit Close the transfer unit and the side cover Paper jams within Paper Feed Unit optional Paper jams within Paper Feed Pedestal optional Open the paper feed cover of the Paper Feed Pedestal Paper Jams Replacing Toner Cartridge Never attempt to incinerate toner cartridges Recommended toner cartridges Open the front cover Hold down the green lever Pull out the toner cartridge Replacing Toner Cartridge Clean the charger Insert the toner cartridge along the rail Replacing Toner Cartridge With the transfer charger wire Phenomenon Usual cause Countermeasure Before Calling Service TechnicianGeneral operation Toner-related items Original/Copy paper-related items Image trouble Tact with the original glass Before Calling Service Technician Page Maintenance and Inspection Daily Inspection 206 Daily Inspection Original glass Guides Platen sheet Cleaning charger Open the front cover Clean the charger Cleaning transfer charger Daily Inspection Page STUDIO182/212/242 Specifications List Print Format 219 STUDIO182/212/242 Specifications OPC Continuous copying speed Paper size Feeder STUDIO182 STUDIO212 STUDIO242 Specifications of Options Reversing Automatic Document FeederAutomatic Document Feeder Automatic Duplexing Unit Paper Feed Pedestal Drawer Module Packing List Copying Function Combination Matrix Combination Matrix 1/2 Combination Matrix 2/2 Function list Department code listList Print Format Supply notice list Mailbox list Configuration page list NIC status page list Menu list Menu List Program Index Numerics 37, 55 137 Index Page Multifunctional Digital Systems