Toshiba 182, 242, 212 manual Before Making Copies, Default settings, Confirming set functions

3 COPYING FUNCTIONS

Before Making Copies

Default settings

Initial settings established when the equipment is powered on before any of the user functions are changed are called default settings. Each setting returns to its default when the power is turned ON, when the energy saving mode is canceled, and when the [FUNCTION CLEAR] but- ton is pressed.

The default settings of the basic copying functions at the time of the installation are shown below.

Item	Contents	Default setting at installation
Copy quantity	1 - 999	1
Paper selection	Automatic paper selection (APS), Man-	Automatic paper selection (APS)
	ual paper selection
Reproduction ratio	25 - 200%	100%
Image mode	TEXT/PHOTO, PHOTO, TEXT	TEXT/PHOTO
Density adjustment	Automatic copy density mode, Manual	Automatic copy density mode
	copy density mode

The default settings above can be changed. For the details, see the following page: P.115 “CHANGING EQUIPMENT’S SETTINGS”

Confirming set functions

Press the [SETTINGS] button to confirm the set functions.

The current settings and functions set appear on the LCD screen.

NONSORT

2IN1 1>1 SIMPLEX

Press the selecting button B or C to display all the settings so that the display will be switched to

the next one. This can also be done with the or button. After you finished the confirma- tion, press the [SETTINGS] button again.

66 Before Making Copies