Turning the demo function off
DEMO
A demonstration of the display is shown if you have not set the clock. You can reduce the power consumed in standby mode by turning it off.
During standby mode
Hold down
Every time you hold down the button:
NO DEMO (off) ↔ DEMO ON (on)
To show a demonstration of the display
Hold down
Note
DEMO function cannot be turned on when Dimmer is on.
Convenient functions
To dim the display panel
Remote control only
Press [DIMMER].
The display is dimmed and the indicator is turned off. (The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
To mute the volume
Remote control only
Press [MUTING].
Press the button again to cancel. “MUTING” goes out.
To cancel from the unit, turn [VOLUME] to minimum
Muting is also cancelled when the unit is turned off.
12
Auto-off function
Remote control only
SLEEP
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes. This function does not work if the source is tuner or AUX.
Hold down
“AUTO OFF” is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, “AUTO OFF” goes out. It comes on again when you select disc or tape.
To cancel
Hold down
Setting the time
Remote control only
1 
2 • 4
3
This is a
1Switch on the power.
2Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK 
PLAY 
REC
Previous display
3(within 7 seconds or so)
Press [g/REW/3] or [4/FF/f] to set the time.
4Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you set the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby mode. The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
RQT6351
