Panasonic SC-AK100 Optional antenna connections, External unit connections, Recording

Recording

If the tape finishes before the CD

The CD continues playing. Press [L/–DEMO] to stop it.

To record on the other side of the tape

Turn the tape over and press [a REC].

Reducing noise when recording AM

Remote control only

Hold down [PLAY MODE] while recording.

Every time you hold down the button: BP1 ↔ BP2

Choose the setting with the least noise.

Notes

•Changes to volume and sound quality do not affect recording.

•You cannot open deck 1 while recording.

•You cannot fast-forward or rewind one deck while recording with the other.

•When recording an AM broadcast, sound is momentarily interrupted when you start and stop the recording.

Erasure prevention

Use a screwdriver or similar object to break out the tab.

Side A

Tab for side B Tab for side A

To re-record on a protected cassette

Cover the hole with adhesive tape.

Adhesive tape

To erase a tape

1.Press [TAPE :] and then [L/–DEMO].

2.Insert the recorded tape into deck 2. Ensure there is no tape in deck 1.

3.Press [a REC].

Optional antenna connections

Use outdoor antenna if radio reception is poor.

FM outdoor antenna

Optional antenna connections

AM outdoor antenna

AM outdoor antenna (not included)

			5	-12 m
			(16	– 40 ft.)
AM	ANT			AM loop
	LOOP
	EX	T		antenna

(included)

Run a piece of vinyl wire horizontally across a window or other convenient location.

Leave the loop antenna connected.

Note

Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during an electrical storm.

External unit connections

Rear panel of this unit

R L

(R) (L)

Analog player (not included)

•An analog player with a built-in phono equalizer can be connected.

•For details, refer to the instruction manual of the units which are to be connected.

•When units other than those described above are to be connected, please consult with your audio dealer.

Using an external unit

REC

AUX

1

FM	ANT
	)
(
GND

FM outdoor antenna (not included)

75 Ω coaxial cable (not included)

1

30 mm (1 3/16”)

2

Shield braid

Listening to an external source

(See above for external unit connection)

1.Press [AUX].

The unit comes on.

2.Start playback from the external source. (For details, refer to the external unit’s instruction manual.)

Recording from an external source

1.	Press [AUX].
2.	Press [a REC] (recording starts).

2

15 mm (19/32”)

3

Core wire

3. Start playback from the external source. (For details, refer to the

external unit’s instruction manual.)

•Disconnect the FM indoor antenna.

•The antenna should be installed by a competent technician.

Using headphones (not included)

Reduce the volume level before connection.

Plug type: 3.5 mm (1/8˝) stereo

Note		11
Avoid	listening for prolonged periods of time to prevent hearing

damage.

RQT6351