Panasonic SC-AK100 operating instructions Set-up, Preparation, Placement Connections

Set-up

Connect the AC power supply cord only after all other connections have been made.

Preparation

Twist and pull off the vinyl tip of the antenna wires and speaker cords.

1 FM indoor antenna

Adhesive tape

Fix where reception is best.

2 AM loop antenna

Stand the antenna up on its base.

3 Speakers

Placement Connections

Identical

TO	SB	-AK1	00	Ω	)
			(6
SPEAKERS

Red

4 AC power supply cord

Note

The included AC power supply cord is for use with this unit only. Do not use it with other equipment.

For your reference

Information you enter into the unit’s memory, except for time, remains intact for up to a week after the AC power supply cord is disconnected.

Connect the left (L) side in the same way.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Caution

•Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified

service person if damage has occurred or if you experience a sudden change in performance.

•Do not attach these speakers to walls or ceilings.

Notes

•Keep your speakers at least 10 mm (13/32”) away from the system for proper ventilation.

•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

•You cannot take the front net off the speakers.

	L	Red (+)
	R
Black	2	Black (–)

Connect each end of the speaker cables to the terminal lever of the same color so (+) and (–) are correct. Never allow the exposed wires to contact each other when connected.

Incorrect connection can damage the unit.

5

RQT6351