Kathrein 260376, UFD 231 Receiver Operation, Switching the unit on, Program selection

RECEIVER OPERATION

The extensive equipping of this receiver permits reception of digital DMX pay-radio programs (with a card), free digital ADR radio programs and also analog satellite radio programs.

In the operating description that follows it is as- sumed that the receiver has already been properly connected up by a competent specialist. If this is not the case, and you intend setting up the con- nections yourself, please read the section "Con- nection and Start-up" beforehand.

Switching the unit on

Switch the unit on via the power switch on the unit. The most recently selected program mode appears (DMX-, ADR- or Analog radio) together with the last selected program position. If the unit was in standby mode before being switched off, it returns again to standby mode when it is switched on via the power switch. The unit is switched be-

tween standby and in-operation via the key on the remote control handset.

Program selection

The receiver offers the user a variety of program selection possibilities:

There is a choice from:

∙120 DMX Pay-radio program positions (with a DMX smart card)

∙100 ADR Radio program positions (free radio programs)

∙100 Analog radio program positions

The ADR- and DMX-programs are transmitted digitally, i.e. almost in CD quality.

The transmission of analog radio programs is car- ried out using the well-known "Wegener Panda 1" standard.

The switch-over to the individual regions takes place using the "DMX"-"ADR"-"RADIO" keys on the remote control handset.

Program selection in the respective regions is pos- sible via the numeric keys (0...9) and the keys on the remote control handset and on the unit.

Digital radio reception

a)DMX-RadioPay-radio programs Display readout: D..

To receive DMX pay-radio programs, insert the smart card into the card slot on the receiver in the direction of the arrow (micro-chip on the un- derside).

Press the DMX key.

The program number, program name and pro- gram category assigned to the program appear in the two-line LCD display.

If you have forgotten to insert the card or you have not inserted it correctly the following mes- sage appears:

ATTENTION:

PLEASE INSERT CARD

The sound is not cleared.

Check that you have inserted the card correctly.

In DMX mode, the only valid DMX program numbers are those established by the program supplier that are also included in the transmis- sion. These are shown in the LCD display.

A change in the predefined numbering is therefore not possible in DMX mode.

(refer to Favorite mode however)

After approximately 3 seconds information about the title, artist, album, author and CD No. is faded-in alternately (TTA-data).

b)ADR-radio reception (free radio programs) Display readout: A..

Press the ADR key

The station name, program number and cate- gory designation of the most recently selected program appear in the display.

In the case of ADR programs, aside from the station and category designation, there can also be additional information transmitted (radio text and other info.). These are then also shown in the LCD display (see also Display Info.).

Note:

The displays and fade-ins only appear if they are also sent by the program supplier.

If no information is transmitted, the message "No Data" appears.

13