Search for ADR- and DMX- programs

PROGRAMMING RADIO PROGRAMS

To locate new ADR- and DMX-programs the auto- matic search can be set up in the Initial Setup Menu for the UFD 231 receiver (setting in the de- livered state).

The automatic search is started if the receiver is

switched into standby using the key on the re- mote control handset.

In the process the receiver searches through the entire frequency range for new programs.

If any are found the receiver then saves these pro- grams.

When the search has finished the receiver finally switches into standby, and the newly-discovered ADR- and DMX-programs are displayed in the LCD display.

If you want to cancel the search, press the key on the remote control handset once again.

By means of the function sort (insert) you can sort the new ADR radio programs into the desired or- der.

The DMX programs will be sorted automatically according to the predefined program numbers.

If the search is terminated with the message "Memory full!", this indicates that the ADR program memory is completely occupied. In this case at least one program must be deleted via the ADR- setup menu and the search is then to be started again.

The automatic search can be turned off in the Ini- tial Setup Menu.