Kathrein UFD 231, 260376 operating instructions Exchange, insert sort and copy pro- gram position

RECEIVER OPERATION

Further setting possibilities for the Info displays are:

1.Step on through the Info data manually with the ok key.

2.Info data running independently (scrolling) (the scroll interval is adjustable from 1 to 5 sec- onds).

3.Fade-in title and artist only.

4.Fade-in title and author only.

Setting of desired display:

Keys	MODE + Numeric key 1,
	or 2, or 3 or 4

according to desired display (press in suc- cession).

This setting is independent of the setting in the Info menu.

Setting of scroll time:
Keys	MODE + INFO
(press in succession)
Set time with:	BACK.
Return wit key

Note:

In ADR mode these data can also be faded-in pro- vided that they are also transmitted by the program supplier.

In the "Analog-radio" mode this information is not available

Exchange, insert (sort) and copy pro- gram position

(only possible in modes: ADR-radio, analog radio

and Favorite - not in DMX mode).

·If you want to change the current program se- quence, you can do this using the functions:

ÞExchange program position or

ÞInsert program position (sort) or

ÞCopy program position.

·For this press the keys:

Þ"MODE" and "ADR" resp.

Þ"MODE" and "Radio" or

Þ"MODE" and "Favorite" in succession,

according to whichever group you want to make changes to.

Example in ADR mode:

Press keys	MODE + ADR
in succession
	ß

Display readout: ADR-Program entry → [ ok ]

ß

Use the keys

ß

to select whether you want to exchange, insert or copy program po- sitions.

	ß
Confirm with:	ok.

ß

Display readout: PROG-No. A 18

	hr 3
	ß
Select via keys:	or

the numeric keys: which program position you want to exchange, insert or copy

	ß
Press:
	ß
Select via keys:	or

the numeric keys: where you want to exchange, insert or copy the program position to

	ß
Confirm with:	ok.

If you want to manipulate further program positions continue using the same sequence of actions.

If you want to exit from the menu, press the BACK key until you are once again in normal program mode.

The functions are carried out in the same manner in the modes "Analog Radio" and "Favorite".

Caution!

When copying program positions, the program po- sition that is being copied to is overwritten and is consequently no longer retrievable.

Operation without remote control

When the satellite receiver is switched on, it al- ways returns to the operating state that was se- lected before it was switched off.

If the unit was previously in Standby mode when it was switched off at the power button on the unit, it switches back into Standby mode when it is switched on again.

If you happen to have mislaid the remote control handset, you can switch the receiver back into op-

eration by simultaneously pressing both - keys on the front of the unit.

In the same way you can change over to the other operating modes (DMX, ADR, Radio and Favor- ite).

16