FUNAI ZV457MG9 A owner manual Video, When you finish with setting, press Setup to exit

SETUPS

Video

1 Progressive Scan (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [OK].

Progressive Scan

ON

OFF

2) Use [{ / B] to select “Yes“, then press [OK].

Activating progressive scan:

Check your TV has progressive scan

and connect with component video cable.

NOTE :

If there is no picture or picture is distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

3) Use [K / L] to select “Yes“ within 15 seconds, then press [OK].

Your setting will be activated.

Introduction Connections Basic Setup Recording Playback

Press [STOP C] if you are playing back a disc.

1Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

2Use [K / L] to select “Video”, then press [OK].

3Use [K / L] to select a desired item, then press [OK].

1 Progressive Scan

2TV Aspect

3 Video Input

Submenu will appear.

4	Refer to 1 to 2 on this page and set
	the selected item.
	• For 3 refer to page 49.

5When you finish with setting, press [SETUP] to exit.

Note

•If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to pages 16-17.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

2 TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back or watching digital TV broadcasting with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a setting, then press [OK].

TV Aspect

4:3 Letter Box

4:3 Pan & Scan

16:9 Wide

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

EN 91

Editing Function Setup VCR Functions Others

Español