Moffat 350A4502P5661 CUT Holes, RUN Wires, Screw in Partway, Optional Power Cord KIT JXHC1

Page 11

Installation Instructions

C.Outside rear exhaust

(Horizontal duct–3¼x 10Rectangular)

Use the diagram or the hood as a template and mark the locations on the cabinet for ductwork, electrical wiring and keyhole screw slots.

Wood shims

(recessed-bottom cabinets only–shims must be a minimum of 3/8thick and cut to fit the width of the inner recessed cabinet bottom)

 

Cabinet front

½

Horizontal duct

 

Cabinet

access hole

 

 

 

bottom

 

13¾(30hood)

 

 

 

13¾(30hood)

16¾(36hood)

 

16¾(36hood)

Hood mounting screws (4) Center line

Electrical access hole

(in wall)

 

 

10CUT HOLES*

Cut holes at marked locations for duct and electrical wiring. For the vertical duct, cut out ¾” extra toward the front of the cabinet so you can move the duct freely when installing the hood. It may also ease installation by cutting the hole 10½” instead of 10”.

11RUN WIRES

Run the electrical wires through the wall or cabinet according to National Electrical Code and applicable local codes.

NOTE: DO NOT turn the power on until installation is complete.

12 SCREW IN PARTWAY

Drive a mounting screw (from the hardware packet) partway into each center of the narrow neck of the keyhole slots marked on the cabinet bottom.

13 OPTIONAL POWER CORD KIT JXHC1*

An optional Power Cord Connection Kit, model JXHC1, is available at extra cost from your GE supplier for installation using a standard 3-prong, grounded wall outlet. Follow the Installation Instructions packed with the kit to connect the power cord to the range hood.

C

Cabinet

 

L

 

 

 

3-prong

 

 

wall outlet

(if using cord

 

connection)

dia. clearance hole for optional power supply location

NOTE: If using optional Power Cord Kit JXHC1, feed the power cord through the hole in the top cabinet while raising the hood. Loop any excess length of cord and tie away with a suitable tape or tie.

14FEED IN WIRES

Lift the hood into position and feed the house wiring through the wiring knockout.

* 1 Ft = 0.3 m 1” = 2.5 cm

11

Image 11
Contents Serial # Range HoodsInstructions SafetyFAN Control Light Control Using the hood controlsCare and cleaning of the vent hood Reusable Metal Grease Filter-Ducted Installations OnlyHood Light Charcoal Filter-Recirculating Installations OnlyOperating Instructions Stainless Steel Surfaces on some modelsElbows, transitions, wall and roofcaps, etc Ductwork RequirementsExhaust connection Maximum duct lengthWORKSHEET-CALCULATE Total Equivalent Ductwork Length Installation InstructionsParts Included Damage SHIPMENT/INSTALLATIONMounting Space Tools YOU will NeedChoose Vent Option Remove Exhaust Adaptor Remove Wiring KnockoutRemove Wiring Cover For 3¼ X 10 Rectangular Ducted Discharge Installations onlyOutside top exhaust Vertical duct-7Round For 7 Round Vertical Ducted Discharge Installations onlyMark Holes CUT Holes RUN WiresOptional Power Cord KIT JXHC1 Feed in WiresSecure Hood Install Light Bulb Follow Electrical CodeConnect Wiring 2321REPLACE Filter Replace Wiring CoverTroubleshooting Checklist What Mabe Will Not Cover Range Hood WarrantyConsumer Support Mabe Will ReplaceContact Us Consumer Support Moffat Appliances Website Schedule ServiceParts and Accessories Extended Warranties

350A4502P5661 specifications

The Moffat 350A4502P5661 is an advanced commercial cooking appliance designed for efficiency, durability, and ease of use in a range of culinary environments. This convection oven is particularly well-suited for restaurants, catering businesses, and bakeries seeking to enhance their cooking capabilities without sacrificing space or compromising quality.

One of the standout features of the Moffat 350A4502P5661 is its robust construction. Built from high-quality stainless steel, this oven is not only resilient against the rigors of a professional kitchen but also provides a sleek and modern appearance. The durable materials ensure that the appliance can withstand high temperatures and frequent use, minimizing wear and tear.

The technology behind the Moffat 350A4502P5661 includes a highly efficient convection system that promotes even heat distribution. This means that food can be cooked more consistently and quickly compared to traditional ovens. The combination of powerful fans and a cleverly designed airflow system allows the oven to maintain precise temperature control, which is crucial for baking and roasting applications.

The Moffat 350A4502P5661 also stands out for its user-friendly control panel. Equipped with intuitive digital controls, operators can easily set and monitor cooking times and temperatures. This digital display helps reduce cooking errors and enhances overall kitchen productivity. Additionally, with programmable cooking settings, chefs can save time by recalling specific recipes and settings at the touch of a button.

Another significant characteristic of this oven is its generous cooking capacity. The oven is designed to accommodate multiple trays, making it perfect for high-demand cooking environments. With options for stacking racks, users can maximize their cooking output without needing additional space.

Furthermore, the Moffat 350A4502P5661 is energy efficient, which is an essential consideration for commercial kitchens looking to reduce overhead costs. Its thermal insulation minimizes heat loss, leading to energy savings while maintaining optimal cooking performance.

Overall, the Moffat 350A4502P5661 embodies a perfect blend of innovation, practicality, and quality. Its combination of advanced technology, strong construction, and user-centric features make it an invaluable asset for any professional kitchen, ultimately enhancing cooking results and operational efficiency.