Panasonic NN-S723BL, NN-S723WL Feature Diagram, Control Panel, Clock Setting, Child Safety Lock

Feature Diagram

hc			d	a	Internal Air Vents
	c			b	Door Safety Lock System
b		f		c	External Air Vents
				d	Control Panel
				e	Identification Plate
				f	Glass Tray
				g	Rotating Ring
		g	j	h	Heat/Vapor Barrier Film
					(do not remove)
				i	Menu Label
				j	Cover	(do not remove)

Control Panel

1. DISPLAY WINDOW.
2. AUTO DEFROST PAD		(Page 12)
3. POWER LEVEL PAD		(Page 9)
4. AUTO REHEAT PAD		(Page 11)
5. AUTO COOK PAD		(Page 14)
6. NUMBER PAD
7. TIMER PAD	(Page 10)
8. POPCORN PAD		(Page 11)
9. QUICK MIN PAD		(Page 9)
10. CLOCK PAD	(Page 9)
11. SERVING/WEIGHT PAD		(Page 14)
12. START PAD.

One tap allows oven to begin functioning. If door is opened or STOP/RESET pad must be pressed again to restart oven.

13. STOP/RESET PAD.

Before cooking: One tap clears your instruction.

During cooking: One tap temporarily stops the cooking process. Another tap cancels all your instructions and time of day or colon appears on the Display Window.

Beep Sound:

When a pad is pressed correctly, a beep will be heard.

If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction. The oven will beep twice between programmed stages. At the end of any complete program, the oven will beep.

Clock Setting

The oven will operate without setting the clock.

Example: To set 11:25 a.m. or p.m.

1.	• Press once.
	➤Colon flashes.
2.	• Enter time of day using
	the number pads.
	➤Time appears on the
	Display Window: Colon
	continues flashing.
3.	• Press.
	➤Colon stops flashing;
	time of day is entered.

NOTES:

1.To reset the clock, repeat steps 1-3.

2.The clock will keep the time of day as long as the oven is plugged in and electricity is supplied.

3.Clock is a 12 hour display.

4.Oven will not operate while colon is flashing.

Child Safety Lock

You can use this safety feature to lock the control panel so that children cannot use the oven when you do not want them.

To set CHILD SAFETY LOCK:

1.	• Hold until “L”
	appears from the
	display.
To cancel CHILD SAFETY LOCK:
1.	• Hold until “L”
	disappears from the

display.

Quick Min Function

This feature allows you to set and/or add cook- ing times easily in multiples of one minute.

To set Standing Time:

1.	• Set cooking time
	(up to 10 taps/minutes)
2.	• Press Start Pad.
	➤Cooking will start on
	P10(HIGH) power.

NOTES:
1. You can use other power levels, select desired
power level before setting cooking time.
2. After setting the time by		Quick Min	Pad, you
cannot use Number Pads, and vice versa.
3. Press	Quick Min	Pad to add more time during
cooking. To verify the additional cooking time,
check the	Display Window.

Power & Time Setting

How do I program Power and Time?

Example: To cook at P6 (MEDIUM) Power for 1 minute 30 seconds.

1.			• Select Power Level.
			(according to the
			chart below)
2.			• Set Cooking Time using
			number pads.
3.			• Press.
			➤Cooking will start. The
			time on the screen will
			count down.
Press			Power Level
once			P10 (HIGH)
twice			P 9
3 times			P 8
4 times		P 7 (MEDIUM-HIGH)
5 times			P 6 (MEDIUM)
6 times			P 5
7 times			P 4
8 times	P 3 (MEDIUM-LOW)/DEFROST
9 times			P 2
10 times			P 1 (LOW)

NOTES:

1.For more than one stage cooking, repeat steps 1 and 2 for each stage of cooking

before pressing Start Pad.

2.When selecting P10 (HIGH) power for the first stage, you may begin at step 2.

3.Two beeps will sound between each stage

of programming. Five beeps will sound at the end of the entire sequence.

4.When selecting P10 (HIGH) power, the maximum programmable time is 30 minutes. For other power levels, the maximum time is 99 minutes and 99 seconds.

5.For reheating, use P10 (HIGH) for liquids, P7 (MEDIUM-HIGH) for most foods and P6 (MEDIUM) for dense foods.

6.For defrosting, use P3 (MEDIUM-LOW).

8 9