Panasonic AW-PH650N manual Parts and their functions, Main unit Pan/tilt head

Page 9

Parts and their functions

Main unit (Pan/tilt head)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

Main unit cover

The sunshade cover and main unit cover must be removed when the cable compensation circuit or landing characteristics are to be changed.

Grip

Used in carrying, installing, or lifting the pan/tilt head.

Sunshade cover

This cover protects the pan/tilt head from direct exposure to sunlight.

Rotary arm

Mount the housing after having installed the housing mount frame.

I/F connector

Connect this to the I/F connector of the camera housing.

Anti-fall wire bolt

This bolt fastens the anti-fall wire which prevents the pan/ tilt head from falling from its installed position.

Pan/tilt head mounting holes (4)

These holes are used to install and secure the pan/tilt head.

Multi connector [MULTI]

The supplied multi cable is connected here.

Coaxial connector [SDI OUT]

This is used for outputting the SDI or other signals which have been input from .

Option connector [OPTION]

The control signals of the controller’s OPTION button are output from this connector.

Be absolutely sure to use a water-proof cable.

The compatible connector is the R28-P8M4.8 made by

Tajimi Electronics Co., Ltd.

 

OPTION

A filter (supplied) must be

 

GND

installed around the cable.

 

 

Install it at a distance within

 

 

30 mm from the connector.

Waterproof the filter using

 

 

tape or tube, for instance.

 

 

 

Service connector

 

(View of connector as seen

 

from the cable)

 

Cable

Within 30 mm

 

from connector

Filter

 

Power connector [POWER]

The supplied power cable is connected here.

Grounding bolt

This bolt is used to connect the wire for system grounding (frame grounding bolt).

Coaxial connector [SDI IN]

When an SDI card is installed in the camera, this connector is connected to the SDI signal output connector.

9

Image 9
Contents AW-PH650N FCC Note Safety precautionsImportant Safety Instructions Accessories ContentsPrecautions for use Introduction Steps to be taken prior to installation Installation precautionsHow to install Precautions for installationDimensions of area where unit is mounted Unit inch mm Mounting Pan/tilt headMounting AC adapter Pan/tilt head Main unit Pan/tilt head Parts and their functionsHousing unit AC adapter unit Supplied cable unit 26P connector male D-SUB 15P connector female 26P connector male 50P connector male 26P connector male  High-density D-SUB 15P connector maleInstalling the housing mount frame InstallationComp circuit board Cable compensation circuit settingsCPU circuit board switch settings Support arm completely enters the groove How to install the cameraWhen the AW-E350 or AW-E650 camera is used When the AW-E750 or AW-E860 camera is usedWhen the AK-HC910 camera is used When the AW-E655 camera is usedWhen the AK-HC1500 camera is used When a regular lens is used  How to attach the lens When a large lens is usedThermostat sensor Check that How to install the housing Connections Concerning the connectors inside the housingConnecting the cameras and housing Connections with a convertible cameraAW-E350 Connections with the AK-HC910 series Connections with the AK-HC1500 Precautions when controlling AK-HC1500 from the AW-CB400 AC power input cable Rubber bushingConnections with AC adapter Multi function controller AW-RP655 Example of connections when using a convertible cameraExample of connections when using a multi purpose camera  Precautions when using the AK-HC910Concerning iris control Limiters Setting the limitersReleasing the limiters Setting the limiter againReplacing the battery Replacement of consumable partsRemoving the battery Installing the new batteryReplacing the motor Replacing the beltReplacing the gear Main unit Appearance11/16 10-1/2 M8 nut Cable specifications Connect to the Iris connector on the camera When an RD lens made by Fujinon is used General SpecificationsPage Panasonic Broadcast & Television Systems Company

AW-PH650N specifications

The Panasonic AW-PH650N is a cutting-edge pan-tilt-zoom (PTZ) camera designed to meet the demands of professional broadcast and live production environments. Known for its robust build and advanced features, the AW-PH650N is a popular choice among broadcasters, event organizers, and content creators looking for high-quality video capture.

One of the standout features of the AW-PH650N is its superior imaging technology. Equipped with a high-sensitivity 1/2.8-inch CMOS sensor, this camera delivers exceptional image quality, even in low-light conditions. With a resolution of up to 1080p and a wide dynamic range, it ensures clear and vivid visuals, making it perfect for various applications, from live sports events to corporate broadcasts.

Another key characteristic is its remarkable 30x optical zoom capability. This provides users with the flexibility to capture distant subjects without sacrificing image quality. The camera also supports a variety of HD video formats, allowing for seamless integration with existing broadcasting infrastructure and workflows.

The AW-PH650N incorporates advanced auto focus technology for quick and precise focusing, even on moving subjects. This is particularly beneficial for dynamic settings where the action is fast-paced. Additionally, the camera features a high-performance stabilization system, which helps to minimize unwanted shake and maintain smooth shots, contributing to a more professional appearance in the final output.

Network connectivity is another significant advantage of the AW-PH650N. It supports both NDI (Network Device Interface) and RTSP (Real-Time Streaming Protocol), allowing for easy integration into IP-based production environments. This capability facilitates remote production and monitoring, providing greater operational flexibility.

User-friendly operability is emphasized in the design of the AW-PH650N. It includes an intuitive control interface, making it accessible for operators of varying experience levels. The camera can be remotely controlled via standard protocols, ensuring compatibility with a wide range of control systems and software.

Overall, the Panasonic AW-PH650N represents a significant advancement in PTZ camera technology, combining high-quality imaging, advanced zoom capabilities, sophisticated focusing, and versatile connectivity options. Its robust performance and user-friendly features make it an ideal solution for anyone looking to elevate their live broadcasting or production capabilities.