Panasonic AW-PH650N manual Connections, Concerning the connectors inside the housing

Page 25

Connections

Concerning the connectors inside the housing

The connectors shown in the figure below are provided inside the housing. Check the connection instructions for each of the cameras concerned, and connect them.

 

LENS I/F (1) connector

CAMERA I/F connector

This is provided for controlling the zooming and focusing of the motorized lens unit. Connect the remote (zoom/ focus) control cable of the motorized lens unit to this connector.

ND/EXT connector

This is provided for controlling the ND filter or lens extender of the motorized lens unit. Connect it when using a motorized lens unit with an ND filter or lens extender function.

LENS I/F (2) connector

Connect this when using a Canon IAS lens, WAS lens or VAS lens or a Fujinon RD lens.

Check that the lens can be stowed inside the housing, because some lenses cannot be stowed according to the position of the connector on the bottom the lens.

LENS I/F (2) control selector switch [Shipment setting: Fujinon]

Set the LENS I/F (2) control selector switch to the position that corresponds to the lens used.

Fujinon: RD lens made by Fujinon

Canon: IAS lens, WAS lens or VAS lens made by Canon

This is provided for controlling a camera. Connect it to the camera REMOTE connector using the camera cable supplied with the AW-PH650.

Camera control selector switch [Shipment setting: HRP]

Camera

Switch setting

Convertible camera

HRP

AK-HC900 series

HRP

 

Control exercised

Control exercised

AK-HC1500

from HRP150

from CB400

 

HRP

CB400

• Use this switch at the HRP setting when using a convertible camera. It cannot be controlled from the AK-HRP150. Use a camera controller for a convertible camera.

• Similarly, use the switch at the HRP setting when using the AK-HC900 series. It cannot be controlled from the AW-CB400. Use the AK-HRP150.

• When using the AK-HC1500, there is a need to select the switch using the camera controller used.

Set the switch to the HRP setting when exercising control from the AK-HRP150 or at the CB400 setting when exercising control from the AW-CB400.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents AW-PH650N FCC Note Safety precautionsImportant Safety Instructions Accessories ContentsPrecautions for use Introduction Steps to be taken prior to installation Installation precautionsHow to install Precautions for installationDimensions of area where unit is mounted Unit inch mm Mounting Pan/tilt headMounting AC adapter Pan/tilt head Main unit Pan/tilt head Parts and their functionsHousing unit AC adapter unit Supplied cable unit 26P connector male D-SUB 15P connector female 26P connector male 50P connector male 26P connector male  High-density D-SUB 15P connector maleInstalling the housing mount frame InstallationComp circuit board Cable compensation circuit settingsCPU circuit board switch settings Support arm completely enters the groove How to install the cameraWhen the AW-E350 or AW-E650 camera is used When the AW-E750 or AW-E860 camera is usedWhen the AK-HC910 camera is used When the AW-E655 camera is usedWhen the AK-HC1500 camera is used When a regular lens is used  How to attach the lens When a large lens is usedThermostat sensor Check that How to install the housing Connections Concerning the connectors inside the housingConnections with a convertible camera Connecting the cameras and housingAW-E350 Connections with the AK-HC910 series Connections with the AK-HC1500 AC power input cable Rubber bushing Precautions when controlling AK-HC1500 from the AW-CB400Connections with AC adapter Multi function controller AW-RP655 Example of connections when using a convertible camera Precautions when using the AK-HC910 Example of connections when using a multi purpose cameraConcerning iris control Limiters Setting the limitersReleasing the limiters Setting the limiter againReplacing the battery Replacement of consumable partsRemoving the battery Installing the new batteryReplacing the belt Replacing the motorReplacing the gear Main unit Appearance11/16 10-1/2 M8 nut Cable specifications Connect to the Iris connector on the camera When an RD lens made by Fujinon is used General SpecificationsPage Panasonic Broadcast & Television Systems Company

AW-PH650N specifications

The Panasonic AW-PH650N is a cutting-edge pan-tilt-zoom (PTZ) camera designed to meet the demands of professional broadcast and live production environments. Known for its robust build and advanced features, the AW-PH650N is a popular choice among broadcasters, event organizers, and content creators looking for high-quality video capture.

One of the standout features of the AW-PH650N is its superior imaging technology. Equipped with a high-sensitivity 1/2.8-inch CMOS sensor, this camera delivers exceptional image quality, even in low-light conditions. With a resolution of up to 1080p and a wide dynamic range, it ensures clear and vivid visuals, making it perfect for various applications, from live sports events to corporate broadcasts.

Another key characteristic is its remarkable 30x optical zoom capability. This provides users with the flexibility to capture distant subjects without sacrificing image quality. The camera also supports a variety of HD video formats, allowing for seamless integration with existing broadcasting infrastructure and workflows.

The AW-PH650N incorporates advanced auto focus technology for quick and precise focusing, even on moving subjects. This is particularly beneficial for dynamic settings where the action is fast-paced. Additionally, the camera features a high-performance stabilization system, which helps to minimize unwanted shake and maintain smooth shots, contributing to a more professional appearance in the final output.

Network connectivity is another significant advantage of the AW-PH650N. It supports both NDI (Network Device Interface) and RTSP (Real-Time Streaming Protocol), allowing for easy integration into IP-based production environments. This capability facilitates remote production and monitoring, providing greater operational flexibility.

User-friendly operability is emphasized in the design of the AW-PH650N. It includes an intuitive control interface, making it accessible for operators of varying experience levels. The camera can be remotely controlled via standard protocols, ensuring compatibility with a wide range of control systems and software.

Overall, the Panasonic AW-PH650N represents a significant advancement in PTZ camera technology, combining high-quality imaging, advanced zoom capabilities, sophisticated focusing, and versatile connectivity options. Its robust performance and user-friendly features make it an ideal solution for anyone looking to elevate their live broadcasting or production capabilities.
Top Page Image Contents