Installation site

INSTALLATION

To operate this unit properly and to obtain maximum performance, install the unit in a location with the following conditions:

1.A location not subjected to direct sunlight

Installation in a location subjected to direct sunlight may lead to inadequate cooling.

2.A location with adequate ventilation

Leave at least 10 cm around the unit for ventilation. Poor ventilation will result in a reduction of the refrigeration capacity.

3.A location away from heat generating sources

Avoid installing the unit near heat-emitting appliances such as gas ranges or stoves. Heat can cause inefficient refrigeration.

4.A location with a sturdy and level floor

WARNING

Install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not adequate, this may result in injury from the unit falling or tipping over.

Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over.

5.A location where objects will not fall on the unit

CAUTION

Never install the unit in a place where the possibility exists that an object may fall on it. There are cooling circuits and electric components in the upper part of this unit. Current leakage or electric shock may be caused if an object falls on it.

6.A location without flammable or corrosive gas

WARNING

Never install the unit in a flammable or volatile location. This may cause explosion or fire.

Never install the unit where acid or corrosive gases are present as current leakage or electric shock may result due to corrosion.

7.A location not prone to high humidity

WARNING

Do not use the unit outdoors. Current leakage or electric shock may result if the unit is exposed to rain water.

Never install the unit in a humid place or a place where it is likely to be splashed by water. Deterioration of the insulation may result which could cause current leakage or electric shock.

CAUTION

The unit starts defrosting frequently due to excessive frost on the evaporator if it is installed in high

temperature and high humidity location. The chamber temperature goes up to approximately 10oC temporarily during defrosting.

MPR-513, MPR-1013R, MPR-1013, MPR-513R specifications

Sanyo, a renowned name in the world of electronics, has made significant strides in the air conditioning sector with its advanced models such as the MPR-513R, MPR-1013, MPR-1013R, and MPR-513. These models integrate cutting-edge technologies and user-oriented features designed to enhance indoor comfort while promoting energy efficiency.

The Sanyo MPR-513R is celebrated for its powerful cooling and heating capabilities. It is designed for medium to large spaces, making it ideal for residential and commercial applications alike. This model leverages inverter technology, which allows for variable speed operation, ensuring that the air conditioning system adjusts seamlessly according to your needs. This not only enhances comfort but also significantly reduces energy consumption, making it an economical choice.

The MPR-1013 and MPR-1013R models follow closely in performance. These units are particularly known for their compact design and lightweight construction, making them easier to install in diverse environments. Both models boast impressive energy efficiency ratings and utilize eco-friendly refrigerants, supporting Sanyo's commitment to sustainability. Their quiet operation is another highlight, ensuring that users enjoy a comfortable environment without the distraction of loud machinery.

On the other hand, the MPR-513 model is distinguished by its advanced filtration system. It is equipped with a multi-stage filtration process that captures dust, allergens, and airborne particles, providing clean and healthy air. Ideal for allergy sufferers, this model emphasizes indoor air quality alongside cooling and heating performance.

All four models come with user-friendly controls, allowing for easy temperature adjustments, timer settings, and remote operation. This feature enhances convenience, enabling users to customize their indoor climate effortlessly.

Overall, the Sanyo MPR series epitomizes innovation with its blend of advanced technologies and thoughtful design. Built to cater to the needs of modern users, these air conditioning units deliver effective climate control while prioritizing energy-saving features and environmental responsibility. Whether for home or office use, the MPR-513R, MPR-1013, MPR-1013R, and MPR-513 models stand out as reliable choices in today's competitive air conditioning market.