HP Z Virtual Installing the operating system, Citrix XenServer, VMware vSphere, NOTE:, Start, Power On/Standby, Configure and Install

Installing the operating system

As with other HP ProLiant servers, this DL380z server does not ship with provisioning media. Everything needed to manage the installation of system software and firmware is preloaded on the server.

You have a choice between two operating systems that can be installed on this HP DL380z server:

●Citrix XenServer

●VMware vSphere

Citrix XenServer

You may install Citrix XenServer using Intelligent Provisioning. Intelligent Provisioning is a single- server deployment tool embedded in all HP ProLiant Gen8 servers, and it replaces the SmartStart CDs and Smart Update Firmware DVD shipped with previous generation HP ProLiant servers. The CDs and DVD do not ship with HP ProLiant Gen8 servers. To prepare for installing the system software using Intelligent Provisioning, obtain a supported operating system on a DVD, CD, FTP server, network, or USB drive. For more information about using Intelligent Provisioning, see the HP Intelligent Provisioning User Guide (http://www.hp.com/go/intelligentprovisioning/docs).

To install Citrix XenServer on the DL380z with Intelligent Provisioning (local or remote), perform the following steps:

NOTE: An Internet connection is required to update the firmware and systems software.

1.Connect the Ethernet cable between the network connector on the server and a network jack.

2.Press the Power On/Standby button.

3.During server POST, press the F10 key.

4.Complete the initial Preferences and Registration.

5.At the first Start screen, click the Configure and Install button.

6.Follow the onscreen prompts to complete the installation.

VMware vSphere

To install VMware vSphere, you may use Insight Control server deployment for an automated solution. For more information, see the HP Insight Control Server Deployment User Guide in the HP Insight Software Information Library (http://www.hp.com/go/insightremotesupport/docs).

If HP Insight Remote Support 7.x is installed in the server environment, you need the following information in order to complete registration:

●Port number: default port number is 7906

●IP address (or host name) of the HP Insight Remote Support hosting device

For more information, see the HP Insight Remote Support guides in the HP Insight Remote Support Information Library (http://www.hp.com/go/insightremotesupport/docs).

Installing the operating system 37