Secure the full-length expansion board retainer

1. Power down the server on page 18

2. Remove all power:

a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server.

3. Extend (Extend the server from the rack on page 19) or remove the server from the rack.

4. Remove the access panel on page 20

5.Install a full-length expansion board (Installing a full-length expansion board on page 65).

6.Install the PCI riser cage on page 26.

7.Secure the full-length expansion board retainer.

8. Install the access panel on page 20.

9. Install the server into the rack (Installing the server into the rack on page 35).

10.Connect each power cord to the server.

11.Connect each power cord to the power source.

12.Power down the server on page 18.

Secure the full-length expansion board retainer 27