HP Z Virtual manual Front panel LEDs and buttons, Description Status

Front panel LEDs and buttons

Item	Description	Status
1	Power On/Standby button and system	Solid green = System on
	power LED	Flashing green (1 Hz/cycle per sec) = Performing power on
		sequence
		Solid amber = System in standby
		Off = No power present*
2	Health LED	Solid green = Normal
		Flashing amber = System degraded
		Flashing red (1 Hz/cycle per sec) = System critical
		Fast-flashing red (4 Hz/cycles per sec) = Power fault**
3	NIC status LED	Solid green = Link to network
		Flashing green (1 Hz/cycle per sec) = Network active
		Off = No network activity
4	UID button/LED	Solid blue = Activated
		Flashing blue (1 Hz/cycle per sec) = Remote management or
		firmware upgrade in progress

Off = Deactivated

*Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the power button cable is disconnected.

**To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and reference the server troubleshooting guide.

Front panel LEDs and buttons 3