Item | Description | Status |
|
|
|
1 | Power cap | Off = System is in standby, or no cap is set. |
|
| Solid green = Power cap applied |
|
|
|
2 | NIC link/activity | Off = No link to network. If the power is off, view the rear panel |
|
| |
|
| |
|
| Flashing green = Network link and activity |
|
| Solid green = Network link |
|
|
|
3 | AMP status | Off = AMP modes disabled |
|
| Solid green = AMP mode enabled |
|
| Solid amber = Failover |
|
| Flashing amber = Invalid configuration |
|
|
|
4 | Over temp | Off = Normal |
|
| Solid amber = High system temperature detected |
|
|
|
— | All other LEDs | Off = Normal |
|
| Amber = Failure |
For more information on the activation of these LEDs, see "Systems Insight Display LED combinations on page 5."
Systems Insight Display LED combinations
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the health LED indicate system status.
Systems Insight Display LED | Health LED | System power LED | Status |
and color |
|
|
|
|
|
|
|
Processor (amber) | Red | Amber | One or more of the following |
|
|
| conditions may exist: |
|
|
| ● Processor in socket X |
|
|
| has failed. |
|
|
| ● Processor X is not |
|
|
| installed in the socket. |
|
|
| ● Processor X is |
|
|
| unsupported. |
|
|
| ● ROM detects a failed |
|
|
| processor during POST. |
|
|
|
|
Processor (amber) | Amber | Green | Processor in socket X is in a |
|
|
| |
|
|
|
|
DIMM (amber) | Red | Green | One or more DIMMs have |
|
|
| failed. |
|
|
|
|
DIMM (amber) | Amber | Green | DIMM in slot X is in a pre- |
|
|
| failure condition. |
|
|
|
|
Systems Insight Display LED combinations | 5 |