Sanyo MPR-1411R instruction manual Installation, Fixing the unit, Ground earth

Page 14

INSTALLATION

1.Removing the packaging materials and tapes Remove all transportation packaging materials and tapes. Open the doors and ventilate the unit. If the outside panels are dirty, clean them with a diluted neutral dishwashing detergent. (Undiluted detergent can damage the plastic components. For the dilution, refer to the instruction of the detergent.) After the cleaning with the diluted detergent, always wipe it off with a wet cloth. Then wipe off the panels with a dry cloth.

2.Adjusting the leveling foot

Extend the leveling feet by rotating them counterclockwise until they make contact with the floor. (Fig. 1) Ensure the unit is level.

3. Fixing the unit

Two fixtures are attached to the rear of the frame. Fix the frame to the wall by attaching a rope or chain between the wall and the fixtures.(Fig. 2)

4. Ground (earth)

The ground (earth) is for preventing the electric shock in the case of the electrical insulation is somehow degraded. Always ground the unit at the time of installation.

Leveling foot

Fig.

 

 

Fixture

Fig.

WARNING

Use a power supply outlet with ground (earth) to prevent electric shock. If the power supply outlet is not grounded, it is necessary to install a ground by qualified engineers.

Never ground the unit through a gas pipe, water main, telephone line or lightning rod. Such

grounding may cause electric shock in the case of an incomplete circuit.

13

- 51 -

Page 13 Page 15
Image 14
Page 13 Page 15
Contents MPR-1411 MPR-1411R Contents Introduction Precautions for Safe Operation Unqualified personnel may cause electric shock or fire Abnormal operation may cause electric shock or fire Precautions for Safe Operation Environmental Conditions Refrigerator Components Refrigerator Components Control panel Inside of front cover Installation Site Ground earth InstallationFixing the unit START-UP of Unit Load line Stock of ContainersExhaust air vent Chamber Temperature Setting SETAlarm Temperature Setting Setting of Delay of Door Alarm Setting of Alarm Resume Time KEY Lock Function Cycle defrost Remote Alarm TerminalDefrost Cycles Forced defrostAlarms & Safety Functions Alarms and safety functionsCleaning of evaporating tray Routine MaintenanceCleaning of cabinet Replacement of fluorescent lamp Replacement of glow starter Cleaning of condenser filterOn start-up TROUBLE SHOOTINGMalfunction Check/Remedy UseDisposal of Unit German EnglishFor EU Users Spanish FrenchPour LES Utilisateurs DE UE PER Utenti UE PortuguesePara Utilizadores DA UE Swedish DutchVoor Gebruikers in DE EU FÖR Användare Inom EUAttachment of recorder MTR-0621LH Automatic temperature recorderOptional Components MPR-S7Attachment of recorder MTR-G04 Optional Components Attachment of battery kit MPR-48B Optional Components Setting for battery before starting SPECIFICATIONS PERFORMANCESafety check sheet

MPR-1411R, MPR-1411 specifications

The Sanyo MPR-1411 and MPR-1411R are notable models in the realm of office automation and multifunctional printing solutions. Designed to meet the demands of modern workplaces, these machines boast a spectrum of features that enhance productivity and operational efficiency.

One of the core features of the Sanyo MPR-1411 series is its multifunctionality. These devices excel in printing, copying, and scanning, making them indispensable tools for any office setting. With the capability to handle a variety of media types and sizes, the MPR-1411 and MPR-1411R can efficiently manage diverse printing tasks, from business documents to marketing materials.

Both models are equipped with advanced digital printing technology. The high-resolution output ensures that documents are crisp and clear, providing a professional appearance that is crucial for business communications. The machines are designed to produce black-and-white prints at impressive speeds, facilitating quick turnaround times essential in fast-paced work environments.

Another key aspect of the MPR-1411 models is their user-friendly interface. The integrated control panel features intuitive navigation, enabling users to access various functions with minimal training. This user-centric design helps to streamline workflows and reduces the potential for errors during operation.

In terms of connectivity, the Sanyo MPR-1411 and MPR-1411R support multiple options for integration into a networked office. They are compatible with both USB and network interfaces, allowing for easy connection to computers and other devices. This feature is vital for teams that require shared access to printing and scanning functionalities.

Energy efficiency is also a central component of these models. Sanyo has implemented several eco-friendly technologies that help reduce power consumption during idle times, decreasing the overall environmental impact. This focus on sustainability does not compromise performance and aids in keeping operating costs low.

Finally, security is a priority in today’s digital transactions. The MPR-1411 series includes features that protect sensitive data during printing and scanning. With options for user authentication and data encryption, businesses can maintain the confidentiality of their essential documents.

In summary, the Sanyo MPR-1411 and MPR-1411R are powerful multifaceted machines that combine functionality, speed, and efficiency. With their advanced printing technology, ease of use, connectivity options, energy-saving capabilities, and security features, they represent an excellent choice for any organization looking to enhance its document management and workflow strategies.
Top Page Image Contents