Before Commencing Operation

Preparation of monitor bottle

Prior to the operation of the unit, fill the monitor bottles (upper and lower) with 10% glycerol (or other solution such as ethylene glycol) by the following procedure:

1.Remove the top and bottom drawer (or shelf).

2.Remove the monitor bottle cover as shown in the figure 1.

3.Detach the sensor from the monitor bottle.

4.To take out the bottle, remove two screws by loosening with hand

5.Pour 200 ml of 10% glycerol (or other solution) into the monitor bottle after removing the cap as shown in the figure 2.

6.Cap the monitor bottle and return the bottle to its original position. Route the lead wire through the hook on the wall.

7.Attach the sensor to the bottle and replace the cover on the bottle.

Fig. 1

loosen

Fig. 2

REMOTE ALARM TERMINAL

The terminal of remote alarm is located inside the front cover. The signal is a dry contact.

Contact capacity is 2A, DC30V.

Output：normal: open abnormal: closed

Connect terminal

Note: In the state that the power supply plug is disconnected, the remote alarm operates.

Remote alarm can be stopped by pressing alarm buzzer stop key (BUZZER) except for case of power failure.

MBR-1404G, MBR-1404GR specifications

The Sanyo MBR-1404GR and MBR-1404G are high-performance, compact solar-powered refrigerators designed to cater to off-grid and energy-conscious consumers. Known for their reliability and innovative technology, these models are ideal for outdoor enthusiasts, campers, and those in remote areas requiring efficient cooling solutions.

One of the standout features of the Sanyo MBR-1404 series is its energy-saving design. These refrigerators use advanced insulation technology, allowing them to maintain optimal cooling while consuming minimal power. This makes them particularly suitable for solar power systems, where users seek to maximize energy efficiency. The MBR-1404GR and MBR-1404G can operate on low voltage, making them compatible with a wide range of renewable energy setups.

In terms of capacity, the MBR-1404GR and MBR-1404G offer ample storage space, accommodating a variety of food and beverage items. With a total capacity of approximately 140 liters, these refrigerators feature adjustable shelves that allow for customized organization, catering to different storage needs. Furthermore, the interior layout is designed to enhance airflow, ensuring consistent cooling performance throughout the unit.

The build quality of the Sanyo MBR-1404 series is robust, with a durable exterior designed to withstand harsh environmental conditions. The insulated design not only aids in energy efficiency but also enhances the unit's longevity, making it a wise investment for outdoor and off-grid living.

Both models are equipped with a user-friendly temperature control system, providing users the ability to adjust settings based on individual requirements. This level of customization is essential, especially in varying climates, allowing for optimal performance year-round.

In addition to their cooling capabilities, the MBR-1404GR and MBR-1404G are designed with silent operation in mind. The absence of noisy compressors makes these refrigerators suitable for quiet environments, ensuring a peaceful experience whether in a cabin, RV, or campsite.

Overall, the Sanyo MBR-1404GR and MBR-1404G stand out with their combination of energy efficiency, spacious interior, robust build quality, and user-friendly features. These refrigerators represent a perfect blend of technology and practicality, meeting the demands of modern consumers looking for sustainable cooling solutions without compromising on performance.