Sanyo MBR-1404G Troubleshooting, Disposal of Unit, If nothing operates even when switched on

Page 23

TROUBLESHOOTING

If the unit malfunctions, check out the following before calling for service.

If nothing operates even when switched on

■There is a power failure.

■The fuse is blown or the circuit breaker is inactivated.

■The unit is not connected to the power supply.

When unit does not get cold enough

■The air exhaust vent is blocked up with containers.

■A large amount of items or warm product was put in the unit.

■There is a nearby heat source.

■The door is frequently opened.

■The ambient temperature is too high.

■The unit is in direct sunlight.

■The door is not securely closed.

■The door seal is damaged or foreign substance is inserted between door gaskets.

The alarm device is activated

When alarm lamp and buzzer are activated, follow the procedures to determine a cause. <On start-up>

■The temperature in the unit does not match a set value. <In use>

■The door was kept opened for a long time.

■Containers of high temperature (load) were put in the unit

In these cases, alarm is removed automatically by running the unit for several hours.

DISPOSAL OF UNIT

WARNING

If the unit is to be stored unused in an unsupervised area for an extended period ensure that children

do not have access and doors cannot be closed completely.

The disposal of the unit should be accomplished by appropriate personnel. Always remove doors to prevent accidents such as suffocation.

廢電池

請回收

This product has an electric battery.

Please recycle it for effective utilization of resources and protection of our environment. Thank you for your cooperation.

Label indication is obliged to comply with Taiwanese battery regulation.

22

Page 22 Page 24
Image 23
Page 22 Page 24
Contents MBR-1404G MBR-1404GR Contents Symbol shows Precautions for Safe OperationItems are stored Prevent electric shock or injury Parts are located in the upper part of this unit May result Page Environmental Conditions Refrigerator Components Inner door Upper monitor bottle Lower monitor bottle Inside of front cover Remote alarm terminal Refer to3 4 5 Control panelInstallation site InstallationGround earth InstallationFix the unit Preparation of monitor bottle Remote Alarm TerminalBefore Commencing Operation Air exhaust vent START-UP of UnitHandling of containers Air intake ventDefrost cycles Temperature displayOperating Instructions Alarm set procedure Alarm, safety function, and self diagnostic functionAlarm and safety functions Cleaning of condenser filter Routine MaintenanceCleaning of cabinet Replacement of fluorescent light Cleaning of evaporating trayCalibration of temperature sensor Alarm device is activated TroubleshootingIf nothing operates even when switched on When unit does not get cold enoughPerformance SpecificationsSafety check sheet 7FB6P101236004 5 April

MBR-1404G, MBR-1404GR specifications

The Sanyo MBR-1404GR and MBR-1404G are high-performance, compact solar-powered refrigerators designed to cater to off-grid and energy-conscious consumers. Known for their reliability and innovative technology, these models are ideal for outdoor enthusiasts, campers, and those in remote areas requiring efficient cooling solutions.

One of the standout features of the Sanyo MBR-1404 series is its energy-saving design. These refrigerators use advanced insulation technology, allowing them to maintain optimal cooling while consuming minimal power. This makes them particularly suitable for solar power systems, where users seek to maximize energy efficiency. The MBR-1404GR and MBR-1404G can operate on low voltage, making them compatible with a wide range of renewable energy setups.

In terms of capacity, the MBR-1404GR and MBR-1404G offer ample storage space, accommodating a variety of food and beverage items. With a total capacity of approximately 140 liters, these refrigerators feature adjustable shelves that allow for customized organization, catering to different storage needs. Furthermore, the interior layout is designed to enhance airflow, ensuring consistent cooling performance throughout the unit.

The build quality of the Sanyo MBR-1404 series is robust, with a durable exterior designed to withstand harsh environmental conditions. The insulated design not only aids in energy efficiency but also enhances the unit's longevity, making it a wise investment for outdoor and off-grid living.

Both models are equipped with a user-friendly temperature control system, providing users the ability to adjust settings based on individual requirements. This level of customization is essential, especially in varying climates, allowing for optimal performance year-round.

In addition to their cooling capabilities, the MBR-1404GR and MBR-1404G are designed with silent operation in mind. The absence of noisy compressors makes these refrigerators suitable for quiet environments, ensuring a peaceful experience whether in a cabin, RV, or campsite.

Overall, the Sanyo MBR-1404GR and MBR-1404G stand out with their combination of energy efficiency, spacious interior, robust build quality, and user-friendly features. These refrigerators represent a perfect blend of technology and practicality, meeting the demands of modern consumers looking for sustainable cooling solutions without compromising on performance.
Top Page Image Contents