BEFORE COMMENCING OPERATION
Installation site
To operate this unit property and to obtain maximum performance, install the unit in a location with the following conditions.
<D A location not subjected to direct sunlight
Installation in a location subjected to direct sunlight may lead·to inadequate cooling.
®A location with adequate ventilation
Leave at least 10cm around the unit for ventilation. Poor ventilation result in a reduction of the refrigeration capability.
@A location far from heat generating sources
Avoid installing the unit near
@A location with a sturdy and level floor
o&'WARNING
Be sure to install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not adequate, this may result in injury from the unit falling or tipping over.
o~CAUTION
Select a level and sturdy floor for installation. This precaution prevents the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over.
Install the unit on a sturdy floor to avoid vibration and noise. Placing the unit on an unsteady floor will cause vibration and noise.
@A location not prone to high humidity
&'WARNING
'"Donot use the unit outdoors. Current \.Y leakage or electric shock may result if the
unit is exposed to rainwater.
'"Never install the unit in a humid place or a \.Y place where it is likely to be splashed by water. Deterioration of the insulation may resultwhich could cause current leakage or
electric shock.
'"Donot install the unit under the piping for \.Y water main and lor vapor. Deterioration of
. the insulation may cause current leakage or electric shock.
@A location without a flammable or corrosive gas
&'WARNING
'"Never install the unit near a flammable or
\.Y volatile location. This may cause explosion or fire.
'"Never install the unit where acid or \.Y corrosive gases are present as current leakage or electric shock may result due to
corrosion.
8