MAINTENANCE
&WARNING
.. Disconnect Always disconnect the power '"Ensure you do not inhale or consume
~supply to the unit prior to any repair or \ . y medication or aerosols from around the unit a
maintenance of the unit in order to prevent | .the time of maintenance. These may be |
electric shock or injury. | harmful to your health. |
Cleaning
G)Clean this unit once a month. Regular cleaning keeps the unit looking new.
®Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories. If the unit is very dirty, use a neutral detergent.
®After cleaning, wipe away the cleaner completely with a cloth washed by clean water.
@Never pour water onto or into the unit. Doing so can damage the electrical insulation and may cause electric shock or short circuit.
@The compressor and other mechanical parts are completely sealed. This unit requires absolutely no lubrication. There is a fan behind the compressor, so be very careful if you stick your hand into this part of the unit.
Replacement of fluorescent light
G)Disconnect the power supply plug.
®Remove all shelves or drawers.
®Remove the two screws fixing the lamp shade.
@Pull the fluorescent light downwards and take it out.
@Replace the light.
@After the replacement, install the shade to it original position.
Cleaning of evaporating tray
G)Clean the evaporation tray twice or three times in a year. The evaporating tray is placed in the rear and
bottom side of the unit.
® Remove the fix plate by pulling the clip towards front.
®Pull the evaporating tray towards front and clean it
completely.
@After the cleaning, replace the fix plate to its original position.
14