BEFORE COMMENCING OPERATION | |
. | . . "' |
IInstallation
<D Remove the packaging materials and tapes Remove all transportation packaging materials and tapes. Open the doors and ventilate the unit. If the outside panels are dirty, clean them with a mild detergent and rinse with water.
®Adjust the height adjusting screws
Extend the height adjusting screws by rotating them counterclockwise to contact them to the floor.
| lb JJ |
|
| ~I | ! |
e | 0 l/ | |
'\ |
| ./"~ |
Height adjusting screw
@Grounding
&WARNING
.. Use an outlet with ground to prevent velectric shock. In the case of no outlet with ground, it is necessary to provide
ground by qualified engineers.
oNever ground the unit through a gas pipe, water main, telephone line or lightening rod. Such wiring may cause electric shock in the case of incomplete ground.
@Fix the unit
Two hooks are attached to the rear of the cabinet. Fix the cabinet to the wall with these hooks and rope or chain.
~" Hook /
9