Sanyo MDF-U32V instruction manual May cause bad effect on your health or environment

Page 5

PRECAUTIONS FOR SAFE OPERATION

WARNING

Do not use the unit outdoors. Current leakage or electric shock may result if the unit is exposed to rain water.

Only qualified engineers or service personnel should install the unit. The installation by unqualified personnel may cause electric shock or fire.

Install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not adequate, this may result in injury from the unit falling or tipping over.

Never install the unit in a humid place or a place where it is likely to be splashed by water.

Deterioration of the insulation may result which could cause current leakage or electric shock. Never install the unit in a flammable or volatile location. This may cause explosion or fire.

Never install the unit where acid or corrosive gases are present as current leakage or electric

shock may result due to corrosion.

Use a dedicated power source as indicated on the rating label attached to the unit.

Connect the power supply plug to the power source firmly. Improper insertion may cause a heat

or ignition.

Use a power supply outlet with ground (earth) to prevent electric shock. If the power supply outlet is not grounded, it will be necessary to install a ground by qualified engineers.

Never ground the unit through a gas pipe, water main, telephone line or lightning rod. Such grounding may cause electric shock in the case of an incomplete circuit.

Never store volatile or flammable substances in this unit if the container cannot be sealed. This may cause explosion or fire.

Never store corrosive substances in this unit if the container cannot be sealed. This may lead to damage to the inner components or electric parts.

Do not insert metal objects such as a pin or a wire into any vent, gap or any outlet for inner air circulation. This may cause electric shock or injury by accidental contact with moving parts.

Use this unit in safe area when treating the poison, harmful or radiate articles. Improper use

may cause bad effect on your health or environment.

Disconnect the power supply to the unit prior to any repair or maintenance of the unit in order to

prevent electric shock or injury.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MDF-U32V Page Contents Symbol shows Precautions for Safe OperationMay cause bad effect on your health or environment Prevent accidents such as suffocation Water Page Environmental Conditions Freezer Components Space for optional component Ultra LOW Control panel and keypadInstallation site InstallationAdjust the leveling foot InstallationRemove the packaging materials and tapes Fix the unitOptional Components Temperature recorderBack-up system Inventory rack START-UP of Unit Key lock function Temperature SettingChamber temperature Alarm temperature setting Alarms and safety functions Alarms & Safety FunctionsSetting of Alarm Resume Time Remote Alarm Terminal Monitor of running status Monitor of Freezer StatusChange of Compressor Delay Time Cleaning of condenser filter Routine MaintenanceCleaning of cabinet Defrosting of inside wall Disposal of Unit TroubleshootingRemoval of nickel-metal-hydride battery Recycle of Rechargeable BatteryLocation of a nickel-metal-hydride battery Performance SpecificationsSafety check sheet 7FB6P10134200

MDF-U32V specifications

The Sanyo MDF-U32V is a high-performance laboratory freezer designed to meet the stringent requirements for preserving sensitive samples. This model is particularly popular in medical, pharmaceutical, and research environments, where maintaining low temperatures is crucial. One of its standout features is its superior cooling performance, capable of maintaining a temperature range as low as -30 degrees Celsius. This capability ensures that biological samples, vaccines, and other temperature-sensitive items are stored safely and effectively.

Equipped with a highly efficient compressor, the MDF-U32V utilizes advanced technology to provide rapid cooling and stable temperature control. The freezer is designed with a cycle system that minimizes temperature fluctuations, offering peace of mind to users who rely on stable storage conditions. The insulation used in the MDF-U32V aids in energy conservation, reducing the overall running costs while maintaining optimal performance.

One of the significant innovations in the Sanyo MDF-U32V is its user-friendly digital control panel. This interface allows for precise temperature setting and monitoring, making it easy for lab personnel to operate. Additionally, the system features an alarm for temperature deviations, ensuring that users are alerted immediately to any changes that could compromise sample integrity.

The MDF-U32V also boasts a spacious interior with adjustable shelving, providing flexibility in sample organization. The interior is designed for easy cleaning, which is an important feature in laboratory settings where contamination risks must be minimized. Furthermore, the solid construction of the freezer is designed to withstand demanding environments, ensuring durability and longevity.

Another noteworthy characteristic is the noise level of the MDF-U32V, which operates quietly, making it suitable for use in settings where noise might be a concern. The freezer is also equipped with an automatic defrost function, reducing maintenance needs and improving reliability.

In summary, the Sanyo MDF-U32V is an exemplary choice for those looking for a dependable laboratory freezer. With its excellent cooling capabilities, advanced digital controls, durable design, and efficient performance, it stands out as a reliable solution for preserving valuable samples in a variety of professional environments. Whether for biological research, clinical applications, or pharmaceutical storage, the MDF-U32V meets the high standards necessary for scientific success.
Top Page Image Contents