Sanyo MDF-U32V specs

CAUTIONS FOR USAGE

1.When the first start-up or start-up after no use of long period, the warning device may not operate, because its Ni-MH battery has completely discharged. This does not denote a malfunction. In this case, continue to operate the unit for about 3 hours, then push the test switch to check if the warning device operates. To fully recharge the completely discharged battery, the unit has to be operated for about 2 days.

2.In the case of high ambient temperature, the cabinet front may heat up after the freezer starts to operate first. However, this does not denote a malfunction. It is due to the hot gas piped around the unit frame to prevent condensation around the cabinet.

3.Cool down the freezer chamber sufficiently before storing materials and put the materials in a small batch to reduce the temperature rise.

4.The digital thermometer of this ultra-low temperature freezer is designed to display the temperature of the center part of the freezing compartment. The thermometer sometimes displays a temperature a little bit higher than the actual temperature of the center part depending on the amount or arrangement of stored items.

5.An access port to take out the measuring cable in the case is provided on the back wall and right bottom of the freezer. Be sure to replace the cap and thermal insulation after taking out of the cable, or the chamber temperature cannot complete down, and frost may accumulate outside the port surroundings.

6.Always open and close the door gently. Rough operation may lead fall down of stocked items, incomplete closing, or damage of door gasket.

7.Check and rectify the problem as soon as possible when the alarm lamp is light and buzzer is activated. Refer to table 5 on page 19 for the alarm.

8.Do not use brushes, acids, thinners, powdered soap or hot water for cleaning the freezer. Polishing powders or hot water can deteriorate the painted surfaces or cause deformation, discoloration or degeneration of plastic or rubber components. Be especially careful not to wipe plastic or rubber parts with volatile solvents such as benzine. Wipe off a diluted neutral dishwashing detergent completely with a wet cloth when it is used.

9.The frost will be built up on the chamber wall and inner door during operation. Use a scraper provided with the freezer or equivalent tool to remove the frost. The inner door is hard to be opened when a large amount of frost is built up on it. In this case, remove the frost by detaching the inner door as shown in page 25.

10.There are pipelines for cooling behind the walls. Do not defrost inside walls using a knife, ice pick, or screw driver. Be careful not to damage the walls or to make a hole on the walls as this could cause a failure of the freezer. Also, take care not to drop a heavy item or anything with sharp edge on the bottom of the chamber.

11.Because of a large freezer, the following facilities are needed; a dedicated power outlet of more than 15A capacity, a motor breaker of more than 15A or a general-purpose breaker of more than 30A. Do not use a branched socket for power source as it may cause unstable voltage and result in a failure of the unit. Always use a dedicated power outlet. For details, consult a Sanyo sales representative or an electrician.

MDF-U32V specifications

The Sanyo MDF-U32V is a high-performance laboratory freezer designed to meet the stringent requirements for preserving sensitive samples. This model is particularly popular in medical, pharmaceutical, and research environments, where maintaining low temperatures is crucial. One of its standout features is its superior cooling performance, capable of maintaining a temperature range as low as -30 degrees Celsius. This capability ensures that biological samples, vaccines, and other temperature-sensitive items are stored safely and effectively.

Equipped with a highly efficient compressor, the MDF-U32V utilizes advanced technology to provide rapid cooling and stable temperature control. The freezer is designed with a cycle system that minimizes temperature fluctuations, offering peace of mind to users who rely on stable storage conditions. The insulation used in the MDF-U32V aids in energy conservation, reducing the overall running costs while maintaining optimal performance.

One of the significant innovations in the Sanyo MDF-U32V is its user-friendly digital control panel. This interface allows for precise temperature setting and monitoring, making it easy for lab personnel to operate. Additionally, the system features an alarm for temperature deviations, ensuring that users are alerted immediately to any changes that could compromise sample integrity.

The MDF-U32V also boasts a spacious interior with adjustable shelving, providing flexibility in sample organization. The interior is designed for easy cleaning, which is an important feature in laboratory settings where contamination risks must be minimized. Furthermore, the solid construction of the freezer is designed to withstand demanding environments, ensuring durability and longevity.

Another noteworthy characteristic is the noise level of the MDF-U32V, which operates quietly, making it suitable for use in settings where noise might be a concern. The freezer is also equipped with an automatic defrost function, reducing maintenance needs and improving reliability.

In summary, the Sanyo MDF-U32V is an exemplary choice for those looking for a dependable laboratory freezer. With its excellent cooling capabilities, advanced digital controls, durable design, and efficient performance, it stands out as a reliable solution for preserving valuable samples in a variety of professional environments. Whether for biological research, clinical applications, or pharmaceutical storage, the MDF-U32V meets the high standards necessary for scientific success.