Lincoln 1601-000-A, 1600-000-A Temperature is not exceeding 140 F 60C, replace thermostat

Page 5
Check for 120 VAC to the relay coil. If voltage is not present, trace wiring back to the control box hi-limit. If voltage is present, check to insure contacts are closing. Check for 120 VAC supplied to terminal #6 of the relay. If voltage is not present at terminal #6, trace wiring back to the power source. Replace relay as needed.
Check for 120 VAC supplied to the centrifugal switch. If no voltage is present, trace wiring back to the oven power relay. If voltage is supplied to the centrifugal switch, and the motor is running, but there is no voltage out of the centrifugal switch, replace the main fan motor.
NOTE: See schematic diagram for proper wire numbers on motors.
Check, replace if necessary. Check, replace if necessary.
Check for 120 VAC supplied to burner blower motor. If voltage is not present, trace wiring back to oven power relay. If voltage is present and motor does not run, replace burner blower motor. WITH POWER OFF: Check for locked rotor.
Check for 120 VAC to the primary of the 24 VAC burner transformer. If voltage is not present, trace wiring back to the burner fuse. If voltage is present, check for 24 VAC at the transformer secondary. If no secondary voltage is present, replace the transformer.
Check for 24 VAC to the centrifugal switch of burner blower motor (see schematic diagram for proper wire numbers). If no voltage is present, trace wiring back to the burner transformer. If voltage is present, check for 24 VAC at the output of the centrifugal switch. If there is no output, and the burner blower motor is running, replace the burner blower motor.
Check for 24 VAC supply to the ignition control at terminals 24V and 24Vgnd. If voltage is not present, trace wiring back to the centrifugal switch. Check for 120 VAC supply to the ignition control at terminals L1 and L2. If no voltage is present, trace wiring back to burner fuse. If the above checks are okay, proceed. The ignition control should switch 120 VAC to the hot surface igniter, across the two terminals marked HSI. If no voltage is present, replace the ignition control.
If 120 VAC is present at HSI terminals, visually check to see that the hot surface igniter is heating (igniter may be viewed through port in the end of burner tube). The igniter should glow bright red. Check all connections to be sure they are tight. If the igniter does not heat, replace hot surface igniter.

 

 

temperature is not exceeding 140° F (60°C), replace thermostat.

 

Cooling fan(s)

120 VAC should be at the motor. If voltage is not present, trace

 

 

wiring back to hi-limit thermostat. Check motor for opens, shorts

 

 

or grounds. WITH POWER OFF: Check for locked rotor.

Oven will not heat

Gas supply

Check for adequate gas supply and closed manual gas valves.

 

 

Also check flexible gas line connection for any damage.

 

Main fan

If not operating, refer to “Oven fan will not run”.

NOTE: These ovens utilize 2 complete burner/temperature control systems. Each system will follow the same troubleshooting sequence.

Oven power relay

Centrifugal switch of main fan motor

Fuse, burner 10Amp

Fuse holder

Burner blower motor

Burner transformer

Centrifugal switch of burner blower motor

Ignition control

Hot surface igniter (located inside burner assy.

Low Profile – 1600 Series Advantage Digital Service Manual – Domestic

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Impinger Conveyor Ovens Temperature Power SupplyControl BOX Auto Cool Down Main FAN CircuitSchematic Diagram Symptom Possible Cause Evaluation Temperature is not exceeding 140 F 60C, replace thermostat Page With Power on and Thermocouple Attached to Page HOT Surface Igniter Replacement Burner Blower Motor ReplacementConveyor Drive Motor Replacement CAPACITOR, Conveyor Motor ReplacementGAS VALVE, Dual Safety Replacement Fuseholder ReplacementTemperature Regulating Valve Replacement Reversing Conveyor DirectionBypass Orifice Replacement Main Orifice ReplacementON-OFF Switch Power Replacement Burner Control TRANSFORMER, ReplacementCooling FAN Motors Replacement High Limit Thermostat ReplacementMain FAN Motor Replacement Thermocouple Typek ReplacementBEARING, Conveyor Replacement Temperature Millvolts ApproxOven Control Replacement Thermocouple MeasurmentLetter Description Advantage SeriesPage Letter Part Number Description Page Letter Description Page Oven Back Page Conveyor

1601-000-A, 1600-000-A specifications

Lincoln 1601-000-A and Lincoln 1600-000-A are two remarkable models produced by Lincoln, showcasing the brand's commitment to engineering excellence and innovative technology. These models symbolize the pinnacle of automotive design and performance, merging luxurious features with state-of-the-art technology.

The Lincoln 1601-000-A offers a contemporary aesthetic with sleek lines and a bold front grille, creating an immediate impression of sophistication. Its ergonomic design is not just for visuals; it contributes to improved aerodynamics, enhancing fuel efficiency. One of the standout features of the Lincoln 1601-000-A is the adaptive suspension system. This system cleverly adjusts to various driving conditions, providing optimal ride quality whether cruising on the highway or navigating city streets.

Inside, the Lincoln 1601-000-A boasts a spacious cabin adorned with high-quality materials, including premium leather upholstery and real wood trim. The emphasis on comfort is evident with heated and ventilated seats, as well as a multi-zone climate control system, allowing all passengers to enjoy their preferred temperatures. Technology is seamlessly integrated into the Lincoln experience, featuring an advanced infotainment system with a large touchscreen display, voice recognition capability, and smartphone connectivity through Apple CarPlay and Android Auto.

On the other hand, the Lincoln 1600-000-A leans towards a more classic yet elegant look. It shares many of the luxurious elements found in the 1601-000-A but distinguishes itself with a more retro style. The engine performance of the Lincoln 1600-000-A is further enhanced by a powerful V6 engine, delivering both power and efficiency. This model emphasizes a smooth driving experience with its active noise cancellation technology, ensuring a serene cabin environment.

Both models are equipped with cutting-edge safety features, including adaptive cruise control, blind-spot monitoring, and automatic emergency braking, designed to protect passengers and enhance overall road safety. Additionally, Lincoln's commitment to sustainability is evident in their eco-friendly production practices and the use of recyclable materials in their vehicles.

In conclusion, Lincoln 1601-000-A and Lincoln 1600-000-A exemplify the perfect blend of luxury, technology, and safety. With their distinct characteristics and features, they cater to a wide range of automotive enthusiasts, ensuring an exceptional driving experience that stands out in the competitive luxury vehicle market. Choosing either of these models means investing in a vehicle that delivers not only on performance but also on style and comfort.
Top Page Image Contents