Lincoln 1600-000-A, 1601-000-A specs

	Hi-limit thermostat(s),	Check for voltage on both sides of the switch. Terminals are
	control box	normally closed. If open, reset and test oven for proper
		operation. If thermostat will not hold, and control box
		temperature is not exceeding 140°F (60°C), replace thermostat
	Relay, oven power	Check for 120 VAC to the relay coil. If voltage is not present,
		Trace wiring back to the hi-limit thermostat. If voltage is present,
		check to insure contacts are closing. Check for 120 VAC
		supplied to terminal #2 of the relay. If voltage is not present at
		terminal #2, trace wiring back to the 10 Amp fuse. Replace relay
		as needed.
	Control transformer	Check for 120 VAC supply to the primary of the control
		transformer. If no voltage is present, trace wiring back to the
		oven power relay. If voltage is present, check for 24 VAC at the
		transformer secondary. If there is primary voltage but no
		secondary voltage, replace control transformer.
	Conveyor motor	Check for 120 VAC supply to the conveyor motor at wire #14 to
		neutral. If no voltage is present, trace wiring back to the primary
		of the control transformer. If voltage is present and the motor will
		not run, check the motor windings for opens or shorts.
		WITH POWER OFF: Check the motor windings as follows:
		Grey to black - 38Ω approx.
		Grey to blue - 38Ω approx.
		Blue to black - 75Ω approx.
		If any of the above fails, replace conveyor motor.
	Capacitor, conveyor	Check for shorts or grounds. Replace capacitor as needed.
	motor	WARNING: Capacitor has a stored charge, discharge before
		testing.
	Switch, conveyor	Check continuity between switch terminals. Replace switch as
	reversing	needed.
	Oven control	If there is 120VAC supplied to the motor, and the motor,
		capacitor, and reversing switch check good, replace the oven
		control.
Conveyor motor runs,	NOTE: Display will
but there is no speed	indicate “Belt Jam”
display
	Oven control	Check for output voltage from oven control to hall effect sensor
		(sensor is located in conveyor motor). Measure voltage at the
		motor connector, red wire and yellow wire. Voltage should be
		approx. 10VDC. If no voltage is present, trace wiring back to
		oven control. If there is no voltage present at the oven control,
		replace the oven control.
	Conveyor motor	If there is voltage supplied to the hall effect sensor, check for a
		frequency output from the hall effect sensor. Measure frequency
		across the yellow and white wires at the motor connector.
		Frequency reading should be approx. 25 – 100 Hz. If these
		readings are not achieved, replace conveyor motor. If the
		readings are achieved, proceed.
	Oven control	If the hall effect sensor readings are correct, but there is no
		speed indicated on the display, replace the oven control.

8	Low Profile – 1600 Series Advantage Digital Service Manual – Domestic

1601-000-A, 1600-000-A specifications

Lincoln 1601-000-A and Lincoln 1600-000-A are two remarkable models produced by Lincoln, showcasing the brand's commitment to engineering excellence and innovative technology. These models symbolize the pinnacle of automotive design and performance, merging luxurious features with state-of-the-art technology.

The Lincoln 1601-000-A offers a contemporary aesthetic with sleek lines and a bold front grille, creating an immediate impression of sophistication. Its ergonomic design is not just for visuals; it contributes to improved aerodynamics, enhancing fuel efficiency. One of the standout features of the Lincoln 1601-000-A is the adaptive suspension system. This system cleverly adjusts to various driving conditions, providing optimal ride quality whether cruising on the highway or navigating city streets.

Inside, the Lincoln 1601-000-A boasts a spacious cabin adorned with high-quality materials, including premium leather upholstery and real wood trim. The emphasis on comfort is evident with heated and ventilated seats, as well as a multi-zone climate control system, allowing all passengers to enjoy their preferred temperatures. Technology is seamlessly integrated into the Lincoln experience, featuring an advanced infotainment system with a large touchscreen display, voice recognition capability, and smartphone connectivity through Apple CarPlay and Android Auto.

On the other hand, the Lincoln 1600-000-A leans towards a more classic yet elegant look. It shares many of the luxurious elements found in the 1601-000-A but distinguishes itself with a more retro style. The engine performance of the Lincoln 1600-000-A is further enhanced by a powerful V6 engine, delivering both power and efficiency. This model emphasizes a smooth driving experience with its active noise cancellation technology, ensuring a serene cabin environment.

Both models are equipped with cutting-edge safety features, including adaptive cruise control, blind-spot monitoring, and automatic emergency braking, designed to protect passengers and enhance overall road safety. Additionally, Lincoln's commitment to sustainability is evident in their eco-friendly production practices and the use of recyclable materials in their vehicles.

In conclusion, Lincoln 1601-000-A and Lincoln 1600-000-A exemplify the perfect blend of luxury, technology, and safety. With their distinct characteristics and features, they cater to a wide range of automotive enthusiasts, ensuring an exceptional driving experience that stands out in the competitive luxury vehicle market. Choosing either of these models means investing in a vehicle that delivers not only on performance but also on style and comfort.