Lincoln 1600-000-A, 1601-000-A service manual

Page 6

 

Ignition control

After 45 seconds of hot surface igniter pre-heat, the ignition

 

 

control will switch 24 VAC to the gas control valves. Check for

 

 

24 VAC output from the ignition control, across terminals

 

 

marked “valve” and “valve gnd”. If no voltage is present, replace

 

 

the ignition control.

 

 

NOTE: The ignition control contains a safety lockout circuit. If a

 

 

flame is not detected within 6 seconds after the gas control

 

 

valve is energized, the ignition control will lockout. To reset, turn

 

 

the power switch “off”, wait 45 seconds and switch the system

 

 

“on” to retry ignition.

 

Gas control valves

Check for 24 VAC supplied to the gas control valves. If voltage

 

 

is present, the valves should open. Check for gas pressure at

 

 

the pressure tap, located in the gas piping just prior to the

 

 

burner. If there is no gas pressure, and the voltage is supplied to

 

 

the valves, check piping for obstructions. If there are no

 

 

obstructions, replace gas control valves.

Flame will not stay lit

Hot surface igniter

The ignition control will keep the gas control valves energized

 

 

for 6 seconds. At the end of 6 seconds, the hot surface igniter

 

 

must sense a flame, or the ignition control will go into lockout.

 

 

(The ignition control requires a minimum of 0.8 micro-amps DC)

 

 

To check the flame sensing operation, connect a digital

 

 

multimeter (capable of measuring DC micro-amps) between the

 

 

“GND burner” terminal on ignition control and the ground wire.

 

 

NOTE: This is a current measurement and the meter must be

 

 

connected in series.

 

 

If these readings are not achieved, check bypass orifice for

 

 

obstructions, if bypass orifice is clear, replace the hot surface

 

 

igniter.

 

 

NOTE: The DC micro-amp test must be conducted with the oven

 

 

in low flame (bypass) operation. Set the temperature control to

 

 

its lowest setting.

 

Power supply

If there is sufficient micro-amp current, but the flame will not stay

 

 

lit, check for proper polarity of the 120 VAC power supply.

 

Ignition control

If there is sufficient micro-amp current, and the 120 VAC polarity

 

 

is correct, but the flame will not stay lit, replace the ignition

 

 

control.

 

 

NOTE: check for proper ground connection of the ignition

 

 

control.

 

NOTE: Flame should

 

 

be lit at this time

 

Low flame is on, but no

Control transformer

Check for 120 VAC supply to the primary of the control

main flame

 

transformer. If no voltage is present, trace wiring back to the

 

 

oven power relay. If voltage is present, check for 24 VAC at the

 

 

transformer secondary. If there is primary voltage but no

 

 

secondary voltage, replace control transformer.

6

Low Profile – 1600 Series Advantage Digital Service Manual – Domestic

Image 6
Contents Impinger Conveyor Ovens Control BOX Auto Cool Down Power SupplyTemperature Main FAN CircuitSchematic Diagram Symptom Possible Cause Evaluation Temperature is not exceeding 140 F 60C, replace thermostat Page With Power on and Thermocouple Attached to Page Conveyor Drive Motor Replacement Burner Blower Motor ReplacementHOT Surface Igniter Replacement CAPACITOR, Conveyor Motor ReplacementTemperature Regulating Valve Replacement Fuseholder ReplacementGAS VALVE, Dual Safety Replacement Reversing Conveyor DirectionON-OFF Switch Power Replacement Main Orifice ReplacementBypass Orifice Replacement Burner Control TRANSFORMER, ReplacementMain FAN Motor Replacement High Limit Thermostat ReplacementCooling FAN Motors Replacement Thermocouple Typek ReplacementOven Control Replacement Temperature Millvolts ApproxBEARING, Conveyor Replacement Thermocouple MeasurmentAdvantage Series Letter DescriptionPage Letter Part Number Description Page Letter Description Page Oven Back Page Conveyor

1601-000-A, 1600-000-A specifications

Lincoln 1601-000-A and Lincoln 1600-000-A are two remarkable models produced by Lincoln, showcasing the brand's commitment to engineering excellence and innovative technology. These models symbolize the pinnacle of automotive design and performance, merging luxurious features with state-of-the-art technology.

The Lincoln 1601-000-A offers a contemporary aesthetic with sleek lines and a bold front grille, creating an immediate impression of sophistication. Its ergonomic design is not just for visuals; it contributes to improved aerodynamics, enhancing fuel efficiency. One of the standout features of the Lincoln 1601-000-A is the adaptive suspension system. This system cleverly adjusts to various driving conditions, providing optimal ride quality whether cruising on the highway or navigating city streets.

Inside, the Lincoln 1601-000-A boasts a spacious cabin adorned with high-quality materials, including premium leather upholstery and real wood trim. The emphasis on comfort is evident with heated and ventilated seats, as well as a multi-zone climate control system, allowing all passengers to enjoy their preferred temperatures. Technology is seamlessly integrated into the Lincoln experience, featuring an advanced infotainment system with a large touchscreen display, voice recognition capability, and smartphone connectivity through Apple CarPlay and Android Auto.

On the other hand, the Lincoln 1600-000-A leans towards a more classic yet elegant look. It shares many of the luxurious elements found in the 1601-000-A but distinguishes itself with a more retro style. The engine performance of the Lincoln 1600-000-A is further enhanced by a powerful V6 engine, delivering both power and efficiency. This model emphasizes a smooth driving experience with its active noise cancellation technology, ensuring a serene cabin environment.

Both models are equipped with cutting-edge safety features, including adaptive cruise control, blind-spot monitoring, and automatic emergency braking, designed to protect passengers and enhance overall road safety. Additionally, Lincoln's commitment to sustainability is evident in their eco-friendly production practices and the use of recyclable materials in their vehicles.

In conclusion, Lincoln 1601-000-A and Lincoln 1600-000-A exemplify the perfect blend of luxury, technology, and safety. With their distinct characteristics and features, they cater to a wide range of automotive enthusiasts, ensuring an exceptional driving experience that stands out in the competitive luxury vehicle market. Choosing either of these models means investing in a vehicle that delivers not only on performance but also on style and comfort.